jordan project, rebuild


UBER progress on this. unfortunately i haven't taken many pictures so im aware alot of you will now switch off...so to keep u interested here is a nice picture.
funny4-1.jpg


ok so ive stolen wazers ek9 rear quarters and fronts, so gone for ek9 factory tints, his fronts are tinted very slightly too...didnt even notice! pictures will come this weekend.

not only a window swap but i swapped leccie windows for windies also out of wazers car...pics to come

set up the rear suspension and handbrakes after having the rtas off.

fitted the obd2 engine harness to the b16a1 and all the engines mounts.

car is mega close to finish now, just a few bits to tidy up and fit.

ordered some tegiwa bits to make it look pretty and function :)
so a battery tie bar kit and the rad stays seen here:
DSCF2194.jpg


then ordered a sweet clutch hose....problem is it is just a length of hose, so got back on the old timmy and ordered a nice hel clutch hose complete with fittings. anyone want a length of clutch hose?
DSCF2195.jpg


ill get out with the camera this weekend
 
looking good mate soo glad to see jimbos jordan being bulit up i was going to buy it just before the accident was gutted :(

as said by vito not a huge fan of stanced cars but at the ned of the day its yours :)

all the best
 
Haven't seen this until now, good job taking all this on jimbo's car looked stunning.

You've certainly got a good sense of humour mate, i was laughing throughout much of the thread. :nice:

one thing i will say though, you need to lay off putting so many photo's up, it takes ages to load the thread :p
 
Topher-EK9 said:
Haven't seen this until now, good job taking all this on jimbo's car looked stunning.

You've certainly got a good sense of humour mate, i was laughing throughout much of the thread. :nice:

one thing i will say though, you need to lay off putting so many photo's up, it takes ages to load the thread :p
Click to expand...

haha mate get yourself a quicker computer :D i like to find the funny side in things, tend to get alot of complaints about it but i wont be changing.


the car has been a struggle to accumulate parts but im nearly there now, picking up a mother haul tomorrow then its just putting things back together.

car isnt going hellaflush now, just well stanced low and a good set of wheels with maybe 15mm spacers so they fit a bit more flush with the arch, so shouldn't get that many haters :)
BlutoHatersgonnahate.jpg
 
you should def take more pics as the build goes on mate.

lol you gotta do what you love... I hate death metal but you don't see me on death metal forums tearing **** up on there. :blabla:

I'll be watching this thread for updates :nice:
 
Topher-EK9 said:
you should def take more pics as the build goes on mate.

I'll be watching this thread for updates :nice:
Click to expand...

to be fair i am PROPERLY **** at remembering to take update pics...ill try and become a better person! lol
 
ok so although theres been a fair bit of progress ive not updated this, so i thought id get off my ass and take some pics as ive finished work early.

snow tried to slow me down, oh no u dont!
DSCF2372.jpg

fitted wazers ek9 factory rear tints, and his fronts which i didnt know but are also tinted :)

that was the last picture i took a few weeks ago, today you'll notice the car isnt in its last resting place :)

some more pics of the tints.
DSCF2395.jpg


stole his windy windows too, as he has lexan windows now!
DSCF2383.jpg

DSCF2384.jpg


door hadle rods also connected! opening the door from the inside is so under-rated!
DSCF2382.jpg


wazer attempted to steal my rear window weather seal for his lexan...uber fail he ripped mine cheers mate
DSCF2394.jpg

DSCF2393.jpg


type r clocks...check :)
DSCF2381.jpg


recaros and some 3 inch sabelts...have 2 but only fitted one.
DSCF2380.jpg


nice legalis r exhaust.
DSCF2375.jpg

jasma certified :)
DSCF2378.jpg


engine in and wired, drive shafts fitted etc
DSCF2385.jpg


dizzy manually wired, have a plug i can bang on there now :)
DSCF2386.jpg


temporary clutch hose, my hardline is a little longer than it should be!
DSCF2388.jpg


teg rad.
DSCF2389.jpg


shiney engine mounts :)
DSCF2387.jpg


gear linkage installed :)
DSCF2392.jpg


the engine harness is obd2a...the dash loom is obd2b so here is dans rewiring jobby :)
DSCF2390.jpg


DSCF2391.jpg


works fine

and here she stands :)
DSCF2374.jpg


comments welcome, although if u have any bad comment...f**k off :)
 
Last edited:
Looking good bud.

Have you got any plans to bring this to jap show?
 
If you do find your self at Jap show you will need to fire across and say HI at the Jordan stand :nice:
 
He is indeed, so he needs to pull his finger out! :nice:

Few more weekends on it I recon pal :)
 
You must log in or register to reply here.
Back
Top