Fuel but no spark???


Will download it mate totally forgot. Is it for OBD1?

I will make sure I get everything re set once it's running thanks for info
 
Mate I think it's 96-98 but most other things are the same .

What year is your engine?
 
It will tell you the date just over no4 runner on ex manifold.

But still the same for most things anyway.
 
Check the plug on the dizzy. Iirc 0bd2a cars have a single plug.
 
FYI whilst rummaging around on the net I've found that the ICM is the same as fitted to some rover 416 models and other Hondas. There are Lucas and intermotor equivalents readily available for around £20 quid. Whilst I've now got my replacement I may fully rebuild the old one too with new cap rotor coil and ICM.

Intermotor 15750, lucas DAJ904
 
some more for reference

Rover : NJL100040, Lucas : DAJ904, Honda : 06302-PT-A00 : 06302-PT2-000, Honda : 06302-PT2-A00 : 30120-PM-A01, Honda : 06302-PT2-A01 : 06302-PT3-000, Honda : 30120-PM5-A01 : 30120-PR3-003, Honda : 30120-PT3-003, Huco : 138068, Marelli : 940038550 : 940038550010, NEC : MC8132 : MC8183 : MC8541, Valeo : 245550
 
Yazza54 said:
some more for reference

Rover : NJL100040, Lucas : DAJ904, Honda : 06302-PT-A00 : 06302-PT2-000, Honda : 06302-PT2-A00 : 30120-PM-A01, Honda : 06302-PT2-A01 : 06302-PT3-000, Honda : 30120-PM5-A01 : 30120-PR3-003, Honda : 30120-PT3-003, Huco : 138068, Marelli : 940038550 : 940038550010, NEC : MC8132 : MC8183 : MC8541, Valeo : 245550
Click to expand...

So all them you listed are icm that will fit honda dizzys ?
Good post , as the icm are pricey for honda ,
I done the same mate , iv my oem dizzy as backup,
But the non oem rotors are crap! And honda oem cap will not fit my non oem dizzy ?
 
The replacement I got is another OEM one but still second hand. Yeah they are the cross refererenced part numbers that were on one of the ebay listings when I searched for the intermotor 15750

So you should be able to replace cap, rotor, coil and ICM yourself for around 65 quid and have a good as new dizzy
 
Japservice parts have the icm cheap.
Have you tried it yet?
 
Thinks it's under a different name on thir site. Ignitor or coil or something like that
 
Ah my bad. I'm getting confused between coil and icm.
I've not replaced the icm before, if your rover one works then that's a good find!
 
Well the part numbers certainly match and I found another thread where someone successfully used one

It must be one of the cross over parts from the D series as the rovers used a D series at one point
 
You must log in or register to reply here.
Back
Top