Jokeshopbeard
VTEC Addict!
- Joined
- Feb 18, 2008
- Messages
- 2,321
I'm still left wondering whether these will fit behind OEM EK9 wheels, since they're a smaller diameter than the 98 spec DC2 wheels...
I'm still left wondering whether these will fit behind OEM EK9 wheels, since they're a smaller diameter than the 98 spec DC2 wheels...
But is there a particular reason you want to hold onto the OEM wheels?
Thanks for the rough price.
I do believe the EK9 also uses 282mm discs though....
There's no reason why the kit for the DC2 wouldn't be able to be adapted (if needed) to fit onto the EK9. There could be 2 different options as well. One would be using the existing disks, but may need spacers with the standard wheels depending on the offset. The second would be a different disk with a deeper offset so the caliper would clear the inside of the spokes on the wheel.
Either are doable, but initially I'd need to compare the differences between the EK9 hub and the DC2, as to whether I'd need an EK9 one or could use the DC2 one we've already got.
Also, if anyone has a standard rim lying around they dont need for a while for development, that'd be handy, and of course I'd be able to sort some discount out for anyone who can help with the supply/development.
The engineers are based in Derby so a local would be even more helpful.
Is this the same kit that Julian is selling on itr-dc2 with the problems?
Duncan, are you the guy who emailed me the other day with an fsnet address? I replied but it bounced back. Didn't get notification of a reply to the thread either. Drop me a PM and we'll sort out price and specs on what you want.