Search results

Wanted EK9 steering rack. Thanks

As per title. Looking for a 2 gauge pod that fits in the cluster. Let me know price including postage to Malta. Thanks

Just installed a K-Tuned Pro Circuit short shifter. No issues on installation and throws are short just as I wanted them. My only concern is when engaging 1st gear. When putting in 1st gear, I have to use some force, more than normally needed to put in a gear. If i dont do that the gear seems...

Hi there, Just removed ABS from my EK and now the pedal is very soft and travels far and stopping power is very very weak. I found no brake fluid leakages from prop valve or from the breaded lines near the caliper. The new pipes from the prop valve are not the metal type as OEM so to say but...

Looking for 4th gears from an S4C box. Looking for 3 of these as they are for my mates. Thanks

Currently doing some interior work on my ek and will be replacing my ek9 steering wheel. The ek9 wheel will be made redundant and no use having it gathering dust in the garage so better off getting some cash for it and spend it on more parts :) Question is how much do ek9 wheels in very good...

Been wanting to start my own build thread for some time and finally got to it. It's not going to be a mega thread like them turbo build threads but will a least do what i can. So my civic started life as an ek4 vti with b16a2 engine and was totally converted to an ek9. the only non ek9 parts...

Long shot here but hoping someone managed this...... I got my hands on a Cusco brake cylinder stopper for an EG......anyone managed to fit this on their EK and can share how they modded it to fit? Thanks

As per title.....looking for a non ABS 40/40 prop valve to get rid of the ABS. Msg me if you got one together with price and postage to Malta. Thanks

Is there any thread with instructions preferably with pics on how to remove the rear interior panels? Searched all over the forum and on Youtube but all in vain. Thanks

Is there a way to recognize a 40/40 prop valve for ABS delete? I know that not all prop valves are 40/40 prop so was just thinking if there is a way to recognize these. Is there a marking or something on it? Thanks

Just installed new grooved Mtec discs with Ferodo DS2500 pads and all bedded in. Just started to go on spirited drives again and have noticed that these pads are ok when cold and normal braking but if I need to brake hard when cold I don't really get good response and have to be carefull. Once I...

Just bought an S4C 5th gear and in doubt which teeth to count on the main shaft gear since there are big and small teeth. Is it the big or small teeth that need to be counted to make sure its an S4C 5th gear? Thanks

Hi, Time to upgrade my engine mounts and checking for best options. Hasport are known to be one of the best around and also relatively pricey. Found these on ebay at quite a reasonable price. I know that when something is too good to be true it usually is but these are so tempting.....is...

Still looking for these.....and please only reply on the thread if u really have these parts for sale and must be willing to post to Malta. Please dont just post on the thread that you have the parts then never get back to me when I send a PM. Either you have the parts for sale or dont post on...

Hi, I have a 98 spec S80 gearbox on my B16B engine and thinking of replacing 4th and 5th gears with the shorter 4th and 5th gears from an S4C gearbox. Would I need any other parts apart from the main and counter gears or is it a straight swap? Thanks

Hi guys, Just wanted to share something I noticed on my b16b engine. After each service with fresh oil (Motul Sport 5w50 or Motul 8100 5w40) for the first 3 months I have no issues and dip stick shows oil level is full. After the 3rd month or so I noticed the oil level goes down by say half a...

Hi, Looking for 4th and 5th gears from an S4C (ek9) gearbox in good condition and can post to Malta. Thanks Kris

Ok long shot here and mostly directed to the mappers as they might have experienced this. I know in the UK you mostly use Hondata ECU's and other software to map and the normal ignition systems are standard with leads directly to the distrubuter. Yesterday i was at the tuner to have an AEM EMS...

Hi all, Can someone please confirm that the injectors in the pics are k20 injectors? Also, to have these fitted on a b16b engine i need tophat adaptors which i have found for the RDX k20 injectors (the blue ones) but have found none for the normal k20 injectors (in pics). Does anyone know if...