Just finished this.. taken me around a yr, just at weekends and as funds allowed.
Weighs in at 860kg with 1/4 tank of fuel so pushing nearly 300bhp per tonne which I hope to crack with the addition of DC5 cams and a remap.
91' EG4 Auto shell
Rolled arches
JDM Plastic headlights
JDM flat side repeaters
Lexan rear 1/4 windows
Stripped rear screen with spring hooks
Rear tailgate stripped to just the skin
Jspeed fender braces
Manual front windows
Manual door cards
Flocked dash.
Sunroof delete
Primo Sunstrip
Spoonish mirrors
Custom lightweight vented bonnet
CS front lip.
Front splitter
Spoon style spoiler.
Custom side skirts.
Full respray in OE Milano Red
Stripped Interior
Gutted dash
VTEC dash loom
Sparkks Racing K swap loom
K-Tuned Immobilser Delete
Hondata K100 ECU.
Corbeau Pro Race seat
Takata Harness
Momo wheel and boss.
DC2 pedal setup
K20a2 engine
K-Tuned Steel Sump
Innovative 60A steel mounts
RBC intake
70mm T/B
Karcepts t/b adaptor
Custom 3.5" intake with velocity stack
Air assist delete
Purge system delete
EP3 rad and custom top and bottom hose
Hasport adaptor for temp and fan switch
Low temp fan switch
Ek9 throttle cable
P/S delete
K-Tuned 4-2-1 swap header
Custom 3" 3 silencer exhaust system with dolphin tail.
EP3 gearbox with Mfactory Carbon syncros 1 - 6
DC5 4th 5th and 6th gears
FD2 5.062 Final drive.
Gripper plate LSD.
RPC stage 3 clutch
FN2 flywheel
EP3 driveshafts with B series outer CV's.
DC5 Shifter box and cables
DC2 1" M/C
Ep3 front calipers
ATR 300mm disc machined
Braided front hoses
Yellowstuff pads
DC2 poly bushed front arms
DC2 24mm poly bushed front ARB and droplinks
Koni Yellows with Extended tophats and GC coilover conversion
12k front 8k rear springs
DC2 22mm polybushed rear ARB
ASR style Subframe brace
Skunk2 black LCA's
Rear - 7x15 et35 Team Dynamics Pro Race 1 with 195 55 15 Advan A048
Front - 7x16 et33 Enkei NT03 with 225 45 16 Advan AD08's
or 8x16 et30 Enkei Forged GTR rims with 225 45 16 AD08's or 7x15 Team Dynamic Pro Race 225 45 15 Dmack's.
Weighs in at 860kg with 1/4 tank of fuel so pushing nearly 300bhp per tonne which I hope to crack with the addition of DC5 cams and a remap.
91' EG4 Auto shell
Rolled arches
JDM Plastic headlights
JDM flat side repeaters
Lexan rear 1/4 windows
Stripped rear screen with spring hooks
Rear tailgate stripped to just the skin
Jspeed fender braces
Manual front windows
Manual door cards
Flocked dash.
Sunroof delete
Primo Sunstrip
Spoonish mirrors
Custom lightweight vented bonnet
CS front lip.
Front splitter
Spoon style spoiler.
Custom side skirts.
Full respray in OE Milano Red
Stripped Interior
Gutted dash
VTEC dash loom
Sparkks Racing K swap loom
K-Tuned Immobilser Delete
Hondata K100 ECU.
Corbeau Pro Race seat
Takata Harness
Momo wheel and boss.
DC2 pedal setup
K20a2 engine
K-Tuned Steel Sump
Innovative 60A steel mounts
RBC intake
70mm T/B
Karcepts t/b adaptor
Custom 3.5" intake with velocity stack
Air assist delete
Purge system delete
EP3 rad and custom top and bottom hose
Hasport adaptor for temp and fan switch
Low temp fan switch
Ek9 throttle cable
P/S delete
K-Tuned 4-2-1 swap header
Custom 3" 3 silencer exhaust system with dolphin tail.
EP3 gearbox with Mfactory Carbon syncros 1 - 6
DC5 4th 5th and 6th gears
FD2 5.062 Final drive.
Gripper plate LSD.
RPC stage 3 clutch
FN2 flywheel
EP3 driveshafts with B series outer CV's.
DC5 Shifter box and cables
DC2 1" M/C
Ep3 front calipers
ATR 300mm disc machined
Braided front hoses
Yellowstuff pads
DC2 poly bushed front arms
DC2 24mm poly bushed front ARB and droplinks
Koni Yellows with Extended tophats and GC coilover conversion
12k front 8k rear springs
DC2 22mm polybushed rear ARB
ASR style Subframe brace
Skunk2 black LCA's
Rear - 7x15 et35 Team Dynamics Pro Race 1 with 195 55 15 Advan A048
Front - 7x16 et33 Enkei NT03 with 225 45 16 Advan AD08's
or 8x16 et30 Enkei Forged GTR rims with 225 45 16 AD08's or 7x15 Team Dynamic Pro Race 225 45 15 Dmack's.
Last edited: