turbo question

[adamek9]

Hi im running a b18c with a go-autoworks street kit set up but im unsure of were the oil feed line goes to on the engine could any1 help me on this please any pictures would be great thanks

 

[robbie_g]

b16 turbo - Honda-Tech

 

[rs250nut]

Tee it in where the oil pressure sender goes in the back of the block or use a seprate oil sandwich plate with 1/8npt ports then the oil is filtered to the turbo.

 

[vtecnology]

For a better feed and to avoid future brake or crack block from the oil pressure switch and the T. I will strongly recommend a oil sandwich plate. You can feed you turbo and a oil press gauge.

 

[adamek9]

Thanks for the help guys
Really so if i get an oil cooler set up with a sandwich plate i got gonect the oil feed to that ??

 

[wuman]

Get a sandwich plate for oil. And buy also a kit for water. it is the easiest and cleanest way

 

[jay_k]

I got a Sandwhich plate, and Oil filter relocation kit. I ran the Turbo oil lines from the relocation kit.

 

[adamek9]

Were could i get the oil sandwich plate ??

 

[adamek9]

Another question will i need to change my fuel presure regelater and fuel rail to run bigger power or will it handle the power

 

[jay_k]

You can normally buy a kit, Oil Cooler, Sandwhich Plate, Pipes etc of eBay, or Demon Tweeks etc.

 

[hadra]

you can get sanwich plate on eBay, or just get a T