GRP/Carbon fibre parts suggestions
- Thread starter trevs ek9
- Start date
Scottek
Member
- Joined
- Sep 28, 2010
- Messages
- 971
It was on their Facebook page. They said they were almost finished making the moulds. Then they said they will make some of the wider vented ones if there is enough interest.
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
Like these, but prefacelift, they are 10mm wider than standard to cover wider tyres, dont see the point in frp oem wings,the weight difference would be grams,
OEM ek9 grp wings are pretty pointless as u say,,only rust free in my eyes,less bother. But those are the js racing wings as far as i kno, i can make these in pre facelift,and facelift but will take time to make cast molds. Im currently making a jap spec rear s2000 bumper cast mold from my own car,, and then molds for the fn2 (06 upwards uk shape civic type r, inc 2.2 diesel models) mugen style vented wings,so if anyone looking into these you can give me a pm etc. Making these molds takes time to get absolutely perfect finish and fitment. As for all the stuff mentioned guys, all can be made in time if i have customers for the part that i make,,dont want to waste time making a mold for just 1 part to be made from it if u get me,,so if yous can put an x1 x2,etc il kno what im going to make first as there will be more interest,but will still make the others down the line.
patrickforde
Member
- Joined
- Jan 7, 2011
- Messages
- 207
what about a set of rear oem style mud guards to fit the ek9 bumper+lip.
Also might sound odd but how about a gurney flap for the ek9 spoiler.
But as mentioned above vented wings should be a good seller. What about a fiberglass boot?
Edit: Meant to add in, intake ducts for the facelift ek9 bumper (Left and Right side), at the moment i can only find the pair available off password jdm which are made from carbon and cost a small fortune.
Also might sound odd but how about a gurney flap for the ek9 spoiler.
But as mentioned above vented wings should be a good seller. What about a fiberglass boot?
Edit: Meant to add in, intake ducts for the facelift ek9 bumper (Left and Right side), at the moment i can only find the pair available off password jdm which are made from carbon and cost a small fortune.
Last edited:
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
like the js racing duct?? fiberglass boot is in the books aswell, gurney flap, il have to make a design up for it.
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
i can,once i get the cast molds sorted,,making the cast molds is the longest part to do as it take ages to get perfect.
standard ek9 pre-facelift Group buy please !
I'd be up for a pair of these too!
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
Currently have made the casts for the mugen fn2 type r foglight inserts,and have one mugen wing mold completed,currently working on the other one,as soon as i get it finished i will make a set and throw up few pictures of them,so if anyone knos a friend that is looking for a set can send me a pm. thinking on starting then the pre face oem front wings, i need to kno if there is many on here that are looking for a set.
sciencefiction
New Member
- Joined
- May 28, 2013
- Messages
- 1
Nice sharing.
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
Be chatting around 500euro the pair. These are fully carbon fiber'd,,not fiberglass and then covered with carbon.
trevs ek9
Member
- Joined
- Feb 15, 2010
- Messages
- 59
An air duct that sits in the fog light part of the bumper,,or on the actual nose of the bumper itself?? I made a j,s racing style airduct few weeks back for a fella, have a picture here.----->
