colmbarr1988
New Member
- Joined
- Oct 31, 2010
- Messages
- 95
I'll leave it open and you can update the thread when you get problems sorted. Be usefull info for someone else in the future
I'll leave it open and you can update the thread when you get problems sorted. Be usefull info for someone else in the future
pistons been fitted tomoro and den it will be heat cycled on the dynowell done for getting it fixed at last!! is it pulling like a train now?!
Don't suppose your running a vtec controller?
problem solved ...............................................
well at long last ,
i stripped the engine down and sent it to the engineer to hone the block but he rang back to say the cylinders were to bad and needed .5 oversized pistons
they were in and out like a jockey and on different sides so this was my issue he nore 2 diff tuners or 3 mechanics cud believe this
big tanks to all who helped