My 2nd EK9, Silver Preface
- Thread starter Tmus
- Start date
- Joined
- Jan 29, 2008
- Messages
- 6,259
Another 9!!! LOL stick with this one! Good work so far.
Nice to see you back in a EK9
I'm sure it won't take you long to get it up to scratch...
i think its fair to say, everyone who has had a honda always comes back to one!!
fair play man!! ive had everything form sti type r to a 180sx from a golf gti to a glanza and its alyways back to that red r!!
galaxyeric
New Member
- Joined
- Aug 29, 2009
- Messages
- 58
Looks nice
What exhaust and header did you install?
What exhaust and header did you install?
Gosh!! The yellow one was so nice
I wanted it!!! Even though I got a C/W one.
LOL sure was.
And exhaust is
DC sports 4-1
Decat
Fujitsubo RM01a
Got the RM01a on today actually, going to do the mani end of the week along with Engine mount
Nicegoingdav
2000 EK9 Rx
- Joined
- Jun 28, 2009
- Messages
- 149
LOL sure was.
And exhaust is
DC sports 4-1
Decat
Fujitsubo RM01a
Got the RM01a on today actually, going to do the mani end of the week along with Engine mount
taking good care of her bro, you'll have to come down when the roads aren't salty!
not yet dude, waiting for some engine mount inserts to come then i'll do it at the same time with the manifold as well.
I've cleaned the intake, looking for a standard rubber intake arm and getting Apexi filter, then it can go on, and cold air feed. hopefully it will be a good intake setup.
Don't really like the J's racing copy thing on it now, altho i'm surprised at the throttle response, not sure about gains tho
I've cleaned the intake, looking for a standard rubber intake arm and getting Apexi filter, then it can go on, and cold air feed. hopefully it will be a good intake setup.
Don't really like the J's racing copy thing on it now, altho i'm surprised at the throttle response, not sure about gains tho
yeah, not sure about them whale cocks....but it does response very quick.
was going for the V2, but decided against long ram, because of less throttle response, and sucking through a long tube.
Then saw them Vision induction kit, where it positions the filter quite far from the engine, then knowing Apexi filter are DA best.
Considering myth about cold air and heat soak, which i don't believe unless you are placing a filter right next to the engine. Ended up with this idea of my mix and match intake....soon LOL
was going for the V2, but decided against long ram, because of less throttle response, and sucking through a long tube.
Then saw them Vision induction kit, where it positions the filter quite far from the engine, then knowing Apexi filter are DA best.
Considering myth about cold air and heat soak, which i don't believe unless you are placing a filter right next to the engine. Ended up with this idea of my mix and match intake....soon LOL
wee update on the 9.
Got a RM01A on the car couple weeks back, here is a not so clear picture of it.
The Tein coilovers were fubar, so i had to get some coilovers.
After having experience with Kaks_ek9 meister R coilovers, liked them alot, got myself a set as well Zeta R, 10kg/8kg.
and on they went
I wanted the wheel to fill the arch, but realise i had 50 profile tyres. therefore-
drop'it like its hot
Steering wheel weren't straight so i 4 wheel alignment it. Front toe almost parallel, tiny tiny bit of toe out. Rear toes are in.
As i expected the Camber is no good, so possibly have to look into getting camber arms in the future.
I'm still awaiting delivery of some small bits!! stupid Snow!
Got a RM01A on the car couple weeks back, here is a not so clear picture of it.
The Tein coilovers were fubar, so i had to get some coilovers.
After having experience with Kaks_ek9 meister R coilovers, liked them alot, got myself a set as well Zeta R, 10kg/8kg.
and on they went
I wanted the wheel to fill the arch, but realise i had 50 profile tyres. therefore-
drop'it like its hot
Steering wheel weren't straight so i 4 wheel alignment it. Front toe almost parallel, tiny tiny bit of toe out. Rear toes are in.
As i expected the Camber is no good, so possibly have to look into getting camber arms in the future.
I'm still awaiting delivery of some small bits!! stupid Snow!
February update, don't know what the hell happen to the camera but the pictures are really small!
Got the DC Sports 4-1 manifold on along with the decat, sounds much cleaner now and awesome in vtec.
Done my custom intake setup, not the best for looks but who cares, i'm using Apexi Power Intake (said to be best filter) along with the Vision pipe. So the filter is as far as it can get from the engine area.
and all important cold air feed (before you can say Heatsoak and short ram
)
other bits
J's racing torqe damper (thanks to matt-o for hooking me up induction and damper)
Interior bits include
different steering wheel, because it looks like the Spoon one?
shifter extension, despite i keep getting abuse driving a transit, it works for me (the car came with shortshifter)
my customary Defi BF tachometer! like i had in my old one.
some random shoots, and got smaller numbers plates as well
Got the DC Sports 4-1 manifold on along with the decat, sounds much cleaner now and awesome in vtec.
Done my custom intake setup, not the best for looks but who cares, i'm using Apexi Power Intake (said to be best filter) along with the Vision pipe. So the filter is as far as it can get from the engine area.
and all important cold air feed (before you can say Heatsoak and short ram
)
other bits
J's racing torqe damper (thanks to matt-o for hooking me up induction and damper)
Interior bits include
different steering wheel, because it looks like the Spoon one?
shifter extension, despite i keep getting abuse driving a transit, it works for me (the car came with shortshifter)
my customary Defi BF tachometer! like i had in my old one.
some random shoots, and got smaller numbers plates as well