MB6 rear calipers on ek9 hubs ?


I also wanted to know this so thanks for the answer... can somebody also confirm if this will work
mb6 calipers on either 98 spec or ek9 carriers on a 96 spec teg?
 
killa_vtec said:
I also wanted to know this so thanks for the answer... can somebody also confirm if this will work
mb6 calipers on either 98 spec or ek9 carriers on a 96 spec teg?
Click to expand...

it should do i am pretty sure calipers an carriers are the same on all 262mm even though some use 262mm discs and some use 260mm
 
from what i've heard the mb6 carriers will not fit a dc2 at all, however the calipers are pretty much the same.. just needed some clarification on that.. I myt just go for ek9/98 spec calipers and carriers to be on the safe side (im doing a 262mm conversion on the rear of my 96 spec by the way)
 
Ive also heard that the mb6 cariers will not fit ek9 or dc2 rear hubs.

anyone know for sure ?
 
killa_vtec said:
from what i've heard the mb6 carriers will not fit a dc2 at all, however the calipers are pretty much the same.. just needed some clarification on that.. I myt just go for ek9/98 spec calipers and carriers to be on the safe side (im doing a 262mm conversion on the rear of my 96 spec by the way)
Click to expand...

If you are swapping on a 96 spec you could simply swap the complete trailing arms. On a EK9 I don't think thats usefull because you'll be left with 4 studs instead of 5 studs
 
back the original post please.

I have ek9 full brake set up without the rear calipers.

Would mb6 calipers fit the ek9 hubs
 
You must log in or register to reply here.
Back
Top