JDM Brembos on EK9 hubs ??


6

60coaly60

New Member
Joined
Mar 29, 2008
Messages
197
Doing a K20 conversion in an EK4.Planning on changing to EK9 hub assembly with EP3 typer Discs and DC5 Integra Brembos.

Has anyone put JDM Brembos from an EP3 or DC5 onto an EK???

If so,what hubs/discs and if so is there a bracket/mount which can be purchased or needs to be fabricated?

Thanks in advance
 
one of my mates done it a month ago.. he used the original ek9 hubs on the front and back. he used the ek9 disks on the front and now he has to get a spacer that goes in behind the disk and the jdm brembo caliper will fit perfectly...
 
karlEK9 said:
one of my mates done it a month ago.. he used the original ek9 hubs on the front and back. he used the ek9 disks on the front and now he has to get a spacer that goes in behind the disk and the jdm brembo caliper will fit perfectly...
Click to expand...

could you give me his number if you dont mind want to see how he did it ?

any pics of it ?
 
Id be interested in knowing how this is done also. would make a good sticky
 
Post up how you do this conversion 60coaly60 would be handy to know
 
60coaly60 said:
ya rang him nice one karl what i tought and had worked out was right :nice:
Click to expand...

it looks well on his civic.. he just put evo v wheels on it.. the dc5 ones wouldn't fit.. he put on a wheel of a euro R, it was only 16" and it fitted but not perfect because of the weights for the balance on the wheel
 
You must log in or register to reply here.
Back
Top