elbuitre104
New Member
- Joined
- Jul 30, 2011
- Messages
- 343
ok first hi people im new to this forum but i think i need to post this since i look around and there alot of wrong info on this so here i go.
1st* i need to jack the car and get all your tools not the many 10,12,14,17,19,32,or 36mm sockets i will recomended a 1/2 in wrench
let the wheel off the car and axle nut (32,or 36mm) then the tied rods,upper & lower balljoins casttle nuts (17mm's)
here's a pic of my dc5r brakes when i got them
anyways i deleted few pics but here's what i got left.well after pressing out the old hub and bearing heres how it looks like with the dc5's on it
few more
here's the spindle with the new bearing and hub and a side by side of the hubs
now its time to put my new rotos and calipers so heres the final result
here are the parts i used to do this new nsk bearings part #44300 s84 a02
brand new hubs from honda for this project you need to used the one from the 98-02 accord v6 front hubs part #44600 s87 a00
you are going to need this hubs to fit the s2000 rotors you can also used the rsx type s ones if want it but i used s2000 since got them cheap
this is only one side i be doing the other side sometime this week as soon as i get some time and putting them on the car with my 16 hope this be helpfull for some people out there the like the dc5 brembos cuz its possible and easy when i do the other side i post more pics
1st* i need to jack the car and get all your tools not the many 10,12,14,17,19,32,or 36mm sockets i will recomended a 1/2 in wrench
let the wheel off the car and axle nut (32,or 36mm) then the tied rods,upper & lower balljoins casttle nuts (17mm's)
here's a pic of my dc5r brakes when i got them
anyways i deleted few pics but here's what i got left.well after pressing out the old hub and bearing heres how it looks like with the dc5's on it
few more
here's the spindle with the new bearing and hub and a side by side of the hubs
now its time to put my new rotos and calipers so heres the final result
here are the parts i used to do this new nsk bearings part #44300 s84 a02
brand new hubs from honda for this project you need to used the one from the 98-02 accord v6 front hubs part #44600 s87 a00
you are going to need this hubs to fit the s2000 rotors you can also used the rsx type s ones if want it but i used s2000 since got them cheap
this is only one side i be doing the other side sometime this week as soon as i get some time and putting them on the car with my 16 hope this be helpfull for some people out there the like the dc5 brembos cuz its possible and easy when i do the other side i post more pics