HELP on seats and rails !!!

[Neeoo]

NEED HELP!!! I am just wondering if a seat on a eg rail will fit into my ej9? Anyone know

 

[elchunk]

is it an aftermarket seat? Im pretty sure the eg rails are the same as the DC2, so one of the rear holes will not line up and will need drilling out to fit.

 

[Neeoo]

is it an aftermarket seat? Im pretty sure the eg rails are the same as the DC2, so one of the rear holes will not line up and will need drilling out to fit.

Its the ep3 type r seats that are on them.

 

[sam-ej9]

yeah man 3 of the holes will line up. if its the drivers seat the rear left hand one may need a small bit of metal welded on then drilled out. easily done, iv seen people run them with 3 bolts but i wouldnt for safety reasons

 

[Neeoo]

yeah man 3 of the holes will line up. if its the drivers seat the rear left hand one may need a small bit of metal welded on then drilled out. easily done, iv seen people run them with 3 bolts but i wouldnt for safety reasons

Thanks alot mate !!!

 

[grantman]

im running them just on 3 bolts. seats defo not going anywhere soon. so its still half safe. i cudnt be arsed drilling and re tapping new holes

 

[Neeoo]

im running them just on 3 bolts. seats defo not going anywhere soon. so its still half safe. i cudnt be arsed drilling and re tapping new holes

So, You say you are running ep3 seats on eg rails in a ej9 right?