My plans for now are,getting a set of forged rods to raise the rev limiter to 8400rpms,maybe buying a b18c block with darton's,machine it to 84mm and knife edge and balance my 89mm crankshaft,put the b18c girdlle and the raise even more the rev limiter. For the head I'm thinking about a full supertech valvetrain and some rocket or spoon cam's. Performer X intake manifold,with a 75mm throtlle body,Hytech rep try y big tube 2,5" collector and 2,5" exhaust. 360cc injectores,walbro internal fuel pump,aftermarket fuel pressure regulator and fuel rail. Tune everything on the dyno and see what come's out... As for the gearbox I allready have dc2 jdm s80 gearbox with the 4,7 final drive and I'm planning on buying an exedy stage 3 clutch and 4kg flywheel... This are my plans for the motor and transmission,for the rest I plan on getting a set of coilovers,camber kits,asr anti rollbar kit,paint it black because it needs it really bad,buy a set of eagle eyes headlights and a set jdm taillights,rear type r replica lip for the eg9,polish my integra type r wheels or buy a set of polished slipstreams. Also I going to renew the my smoked windows,they are a little scratched and the previous owner had different tints in the front and rear windows... As for interiors I'm thinking about a set of black recaro's from a dc2,dc2 steering wheel and reupholster the interior to match the recaro's including the roof,door panels,etc...
Sorry for the long post...
But well these are my entire plans for my eg9,and I know they are going to a long time to complete but nothing a little preserverance nd effort won't handle!