get a squeal when i release clutch pedal


B

baz_ctr

www.bsp-imports.com
Joined
Mar 29, 2008
Messages
418
hi Guys i am starting to notice a light squeal when i release the clutch pedal only happens when the car is pulling off in first under stress (get away from lights quick or pulling off on a hill), i am thinking it's the release bearing on it's way out or maybe the diff but i am no expert has anybody had this problem on there eg6 with y21 or simliar
 
yeah is say its time for a new clutch,could be the torsional damper springs on the disc,or something broken on pressure plate
 
shooter mcgavan said:
yeah is say its time for a new clutch,could be the torsional damper springs on the disc,or something broken on pressure plate
Click to expand...

my clutch has a slight squeel constantly,
Do I need a new clutch?
Bear in mind its only done 7,000 miles :nice:
 
shooter mcgavan said:
yeah is say its time for a new clutch,could be the torsional damper springs on the disc,or something broken on pressure plate
Click to expand...

that's what i wanted to hear i have new clutch+flywheel final drive already to go in was waiting on clutch to go to fit them:clap:
 
what clutch is the car at the mo?? my release bearing was nakerd and a rattely sound came from the car
 
flano said:
what clutch is the car at the mo?? my release bearing was nakerd and a rattely sound came from the car
Click to expand...

couldn't tell what is in the car, clutch bits perfect every time just the squeal is doing my head in
 
proly the release bearing.. i would just leave it, itll be fine. my friend and i had this and the clutch always worked no problem, we both were hard on our cars and did over 40k miles on the clutch.. BTW, this was the ACT Xtreme clutch set.
 
i have the same problem turned out to be the spiggot shaft bearing in the centre of the flywheel
 
Bon87 said:
my clutch has a slight squeel constantly,
Do I need a new clutch?
Bear in mind its only done 7,000 miles :nice:
Click to expand...

quite possible the clutch is fine maybe all the dust wasny cleaned off the spigot shaft and greased and its causing a bit of a squeak
 
This weekend my friend just installed 100% brand new OEM from Honda ITR clutch/pressureplate/throughout bearing/pilot bearing and she has the same problem so definitely it has nothing to do with needing a new clutch. Perhaps its the way the disc beds into the flywheel?
 
took gearbox out the weekend the clutch was knackered the springs, release bearing were fcuked and clutch disc was cracked from oil contamination form oil leaking into gearbox from worn distributor seal
 
You must log in or register to reply here.
Back
Top