fujistubo legalis r or rm01a


lumek4

lumek4

Active Member
Joined
Oct 29, 2007
Messages
1,120
hey guys i have already got the fujistubo power gettor on my car at the moment i like everythin about the exhaust. the power gains,performance and the noise it makes. the only thing wrong with the power getter is the b pipe is made from mild steel so is the pipe that goes into the back can and now that its a good age it has had a few cracks that iv had to weld there for soon im going to buy a new one.

my choises are the legalis r or the rm01a. i want an exhaust that is as good is the power getter. i want it to be loud but not to loud if you know what i mean and give me good bottom end power with good top end power just like the power getter.

if there is anyone who has got these exhausts on there car and could share info that would be awsume

my set up is
b16a2
ek9 cams v/springs and retainers
dc sports header 4-2-1 and de cat
short ram filter with cold air feed

cheers callum
 
i got a legalis r so does haitch on here iirc
awesome exhaust, sounds nice and not to nice
didnt pull as hard as my straight through spec 3 though
 
cheers for the info alan. did you feel gains from the legalis r. and do you get a good rip in v-tec. just dont want an exhaust that is loud when on the motorway or on level throttle. but when you put the foot down you get a good note
 
cant say if i felt gains, it pulled alot harder with my straight through spec 3 as stated and ive not been able to compare to anything else
i know ijwhiteman has tried legalis r and twin loop and n1 if that may help?
vtec werent as aggresive as my spec 3 either.

cant help you on weather it is loud or not, i run decat with stripped rear and at 70-80 its still loud. saying that it is one of the more quiet exhausts with a lovely note though
 
Had the rm01a on both my teg and now my ek9. I thouroughly recommend it. Sound is bearable power gains are good and it is very wellmade.
 
martin251184 said:
Had the rm01a on both my teg and now my ek9. I thouroughly recommend it. Sound is bearable power gains are good and it is very wellmade.
Click to expand...

cheers martin, is the b pipe full stainless cos the power getter b pipe aint.

off the info i have found im making out the the power getter is a top end power exhaust yet i feel really noticable gains low down the revs 2. and from what i can make out is the rm01a is a good mid range exhaust so how well dose it perform on top end power.

also what is the db level if anyone knows cos a few people say the power getter is the loudest and i wouldnt class it as a loud exhaust
 
It is stainless throughout. However i would not say it is the loudest exhaust in the world. Not alot louder than a twinloop really.
 
if you get rid of this for another exhaust let me know, as i want something quieter and will be able to fab it to my needs

cheers
 
pimpinblackcivic said:
if you get rid of this for another exhaust let me know, as i want something quieter and will be able to fab it to my needs

cheers
Click to expand...

will do bud. iv had to weld it a few times already still a good exhaust. hope to get a new one after christmas
 
You must log in or register to reply here.
Back
Top