Front Bumper Fitment


projectgtr

projectgtr

Member
Joined
Sep 30, 2008
Messages
137
Hi guys
Been noticing the font bumper on my EK creating a small gap where it meets the fender, the little plastic holders than support it to the fender were getting loose. Then i had a trackday and a slight off onto the grass where they popped completely, they dont seem to fully hold the bumper in place anymore. Can you get replacements from Honda? Then i got thinking is there a more secure option? would a nut and bolt system be a better option? just looking for some input.

Thanks
 
I'm having same problem on my daily at the moment.
I've been told they're 60p from Honda to get the butterfly plug that screw goes into to hold bumper to wing.
Or yes you can just use nut and bolt.
You'll need a spacer though to go between the 2 or the gap won't look right.
 
I replaced mines with a nut/bolt myself and tey hold the bumper much better and can get a much better fit :)
 
nut bolt and some large washers to stop the bolt pulling through.
 
the little plastic thing isnt great, especially if someone else has tried putting a big ignorant screw up through it in the past! lol
 
You must log in or register to reply here.
Back
Top