linh004
Member
- Joined
- Jun 25, 2014
- Messages
- 180
Suspension I've got out the way all ready, got a brand new set of meisterRs waiting to be fitted which shall be done on the 5th of sept. A full rebush will also be done some point after that when the car goes into the garage to have its arches done. Brakes, stock 282/262 calipers with brembo blanks+ebc yellows up to the job? If not, will go for a 300mm setup in the future with some carbotech pads.
Exhaust I'm currently running a tegiwa mani with a custom 2.5inch system which ill be keeping, bar the tegiwa mani obviously. I can sell it for about 300-350 to recoup some cash.
Engine management will be using a socketed p28 for now till i have the funds to upgrade. I won't be doing my own mapping, Romain tunes using Neptune RTP so effectively a p28 SHOULD be adequate enough for now.
Tyres arnt too much of a concern for now. I can budget this in later on as I won't be starting the build till december-ish Was looking at re002s for the road and for trackdays something like ad08s or r888 if need be. I have two sets of rims so these will do perfectly
Driveshafts - stock drive shafts won't be enough? I thought they were since no body else has mensioned them in people's builds lol.
As said, budget will be 3k but I can stretch this if I need to which it seems like I probably will - not the main concern really. The main thing is just choosing a turbo kit that will provide me with what I want and be reliable at the same time.
Exhaust I'm currently running a tegiwa mani with a custom 2.5inch system which ill be keeping, bar the tegiwa mani obviously. I can sell it for about 300-350 to recoup some cash.
Engine management will be using a socketed p28 for now till i have the funds to upgrade. I won't be doing my own mapping, Romain tunes using Neptune RTP so effectively a p28 SHOULD be adequate enough for now.
Tyres arnt too much of a concern for now. I can budget this in later on as I won't be starting the build till december-ish Was looking at re002s for the road and for trackdays something like ad08s or r888 if need be. I have two sets of rims so these will do perfectly
Driveshafts - stock drive shafts won't be enough? I thought they were since no body else has mensioned them in people's builds lol.
As said, budget will be 3k but I can stretch this if I need to which it seems like I probably will - not the main concern really. The main thing is just choosing a turbo kit that will provide me with what I want and be reliable at the same time.
Last edited: