DC5 brake parts on EK help

[Kid-Vtek]

Hey guys im very confused and after a couple days of internet searching i cant seem to find a definitive answer so im asking for some help. I have a 4x114.3 rear disc conversion that im going to do on my 96 EK and im looking to get all the parts in order so that i have as few hiccups as possible during the install. from my understand i need the 4040 prop valve and 1" M/C and brake booster are recommended. Heres my question... will my M/C, brake booster and prop valve from my 2003 RSX type S work? the vehicle is just sitting im my garage as a parts car and if i could use parts from it that would be great. from what i found the M/C from it is 1" and the prop valve is a 4040 but im not sure if they will actually work in conjunction with my 4x114 swap. im trying to keep down time as short as possible that is why im asking before going ahead and test fitting the parts so if any one has attempted this or something similar please chime in. thanks guys cheers!

 

[JDMFreak]

if you have an 96-00 HB, you already have the 4040 prop. valve, but if you have a coupe model, you will need to obtain one from an HB or Si model. The 1" M/C & BB is highly recommended. I recommend you to get one off of an 01 USDM ITR, it bolts right up with 0 mods (ie bending brake lines).

 

[Kid-Vtek]

ITR are very difficult to find here that's why I'm asking because I have the RSX just siting there. I thought only civic with disc brakes in the rear had the 4040 prop, I have drums in the back