b18 help!!

[sammyb]

Just a few questions chaps, with the b16a2 and the b18c4 completely different looms?? also the driveshafts, if i fit the s9b gearbox can i use the std drive shafts or i do i need the mb6 ones?? then if i fit the mb6 shafts do they fit in my ek4 hubs??

 

[pimpinblackcivic]

loom im not sure as when I used my c4 bottom end in my last build I kept the b16 head and loom. the shafts and hubs will be interchangeable. remember the s9b is looooooong

 

[689R]

yeh b18c4 uses a mb6 loom originally obviously.

but will work with the EK4 loom in your car too.

and i would NOT fit the S9B box, sure it has an lsd, but it also has antelope spec gearatios.

 

[_JT]

yeh b18c4 uses a mb6 loom originally obviously.

but will work with the EK4 loom in your car too.

Don't forget the extra wire for the intake butterfly valves OR remove them

and i would NOT fit the S9B box, sure it has an lsd, but it also has antelope spec gearatios.

lol But thats not true for all of those gears. But the S4C or S80 is still a better box with shorter gears and a better LSD.