CS!
New Member
- Joined
- Jun 3, 2010
- Messages
- 78
The time has come for me to choose a set of cams for my B16a6. I want a drop in cam that does not need much tuning to get to their full potential. I would prefer a set of ITR / CTR cams, but these are proving very difficult to get hold of. I may be able to get my hands on a set of crower 401's for a decent price.
My current mods are as follows;
Megan Racing 4-1 header
2.25" exhaust
Walbaro 255L/hr fuel pump
Blox AFPR set to 45PSI
CC Ultralight flywheel + stage 1 clutch
MSD dissy cap, rotor, coil and 8mm plug leads.
Factory stock bottom end and head.
I have read that the 401's are basically CTR cams. My question is, are they just drop in and go, like the ITR / CTR cams, or would I need cam gears to go with them?
My current mods are as follows;
Megan Racing 4-1 header
2.25" exhaust
Walbaro 255L/hr fuel pump
Blox AFPR set to 45PSI
CC Ultralight flywheel + stage 1 clutch
MSD dissy cap, rotor, coil and 8mm plug leads.
Factory stock bottom end and head.
I have read that the 401's are basically CTR cams. My question is, are they just drop in and go, like the ITR / CTR cams, or would I need cam gears to go with them?