Search results


  1. B

    head gasket & coolant pressure

    again more problems !! i have asked about a few problems all of which have been sorted by changing my head gasket. the problem i have now is it builds up pressure really quick in the coolant system , i have bled the system a few times the thermostat opens which is fine no bubbles but as soon...
  2. B

    itb's and injectors

    hi can anyone give me an idea what size injectors to use please , im getting some independant throttle bodies for my b18c4 and was wondering if i should upgrade my injectors ,, if you think i should what size should i get and what options are there . cheers
  3. B

    good b18c4 iacv needed

    hi im in need of a good b18c4 iacv i guess these are often needed so any help would be good :please:
  4. B

    ect drops my idle , confused

    guys i have a ej9 with the b18c4 engine ,type r pre face lift loom and im using a winfab tuning ecu ,, im having a problem with my idle its about 2200 once warmed up , but found if i unplug my ect then plug it back in it idles at 800 and stays there until i turn the engine off and then restart...
  5. B

    b18c4 gearbox fitment help

    hi i have look through lots of write ups about gearboxes but i cant seem to find anything that tells me which gearboxes will fit my b18c4 ,, is it a case of all b series gearboxes are interchangeable ?? my b18c4 box is knackerd and the gearing was not great anyway so im looking for some...
  6. B

    b18c4 into ej9 d14a4 please help

    hi i really nead desperate help im putting a b18c4 into my ej9 non vtec, i have sorted the wiring at the ecu but i have two plugs the gearbox end and the plugs on the b18 dont fit the 1.4 plugs im really at a loss can any one please help with the wiring ( pictures would be a great help )...
  7. B

    wheels dont fit

    hi guys i have just changed my hubs ,brakes and wheels from my broken vti-s mb6 on to my 1.4 ej9 now my wheels are catching the arches and touching the inner arches on the front under full lock my wheels are 7 x 17 " et 40 offset with 205 40 17 tyres i dont understand my vti-s was very...
  8. B

    hondata s200

    hi can any one tell me where i can get an hondata s200 ecu and how much im looking at i live in the cambridgeshire area so any where quite close wouldbe nice:)
  9. B

    compression ratios

    hi guys im in the process of stripping my b18c4 to rebuild as its a high milage lump i was wondering if any one could explain some thing checking out compression ratios of b series engines the b18c4 has pretty much the same stroke,bore,rod length and stroke ratio as a b18c6 but the c6 has...
  10. B

    b18 into 1998 1.4

    hi again i have an mb6 b18c4 which has just been writen off and i have the offer of a two door hatch 1.4 ltr 1998 in excelent condition i was wondering if i can transplant the engine and gearbox etc and would i need to get any thing to complete the transplant it would be a great shame to...
  11. B

    cold idle problems

    hello guys my name is bob im looking for ecu wizards , i have an mb6 b18c4 and i have bought a p28 ecu with a spoon chip which will not idle cold i thought it might be the chip at fault so i changed it with a mugen chip and it does the same thing the car idles fine with the standard ecu have...
  12. B

    hi guys very impressed with site

    hi my name is bob im from peterborough i am new to the world of civics and im having fun so far but started to have problems :mad: and i think you gents could be the ones to help i have a civic mb6 b18c4 with a standard engine so far ,, i bought a p28 ecu from america and i have put an mugen...
Back
Top