robthedoc
civic disobedience
- Joined
- Feb 14, 2013
- Messages
- 1,533
hi guys I'm using acl flexigauge to measure the clearance of the mains. It's too tight. Minimum clearance is 0.024 mm I'm reading less than that.
Crank hasn't been ground and measures in spec. Bearings are std size acl race bearings.
Anyone come across this before? Going to measure the bearing thickness but had kinda hoped I wouldn't have problems like this.
Crank hasn't been ground and measures in spec. Bearings are std size acl race bearings.
Anyone come across this before? Going to measure the bearing thickness but had kinda hoped I wouldn't have problems like this.