Tonight after work i decided to start to remove the suspension parts,
Put front end of the car on jack stand,
Removed the stock EK9 shock and spring, but i don't have the tools to loose the axle nut. I am going to get some new socket and breaker bar,
From the above picture, i can still see the original red colour!!
The following parts will replace the old parts from the above picture. The 2 Mugen bushing are for the lower arm, the other Honda parts are EK9 parts.
Hopefully i can get all the suspension parts separate....it is pain in the ass to separate it........If i can get it all apart, i shall be able to get the lower control arm bushing replace on Saturday by machine shop. Then i can start putting it back together.
As for the Spoon calipers, i need to get it on and see how much spacer is need because even with 15" +35 offset Spoon wheel, it won't clear it........then i can decide on the brake disc.