Wiseco pistons b16


josegr

New Member
Joined
May 5, 2016
Messages
17
Hi, I'm interested in put wiseco pistons 81.25 with H eagle rods in a B16a2, but I have read that I could have problems with the oil squirts and I want to keep them.

How can I do it? Can anyone help me?

Thanks in advance
 
they'll probably be ok on a b16a as the stroke isnt as long as a b18c.
with the b18c you need to bend the squirters slightly to clear the piston skirt.
 
Yes you do need to check them as I had the exact same setup and had to tweak them, you can either bend them slightly or file the end off them (if filing them make sure to properly clean them!)
 
Thanks you very much for the answer!
So, I suppose I will try to tweak them. In addition, I bought a cometic head gasket 0.018"( I have also the oem gasket 0.028") but I reckon it is not suitable for wiseco pistons, I have read that I need at least 0.040", @Murray which gasket did you use?

Thanks!
 
Thanks you very much for the answer!
So, I suppose I will try to tweak them. In addition, I bought a cometic head gasket 0.018"( I have also the oem gasket 0.028") but I reckon it is not suitable for wiseco pistons, I have read that I need at least 0.040", @Murray which gasket did you use?

Thanks!

I used a standard Honda gasket. They cope very well under boost.
 
Back
Top