VSM EK9 K20 Turbo Project


Slight change of plan with the induction side of things. Decided to scrap the airbox and stick the filter low down inside the bumper instead. Knocked up some pipe work tonight - little bit more needed to finish off tomorrow.


 
Lovely vsm an some nice parts gone into it, il take that box if ur not using it!:))
 
I'm not really sure what's on the market to be honest - I'm going by my own specs, so will see how it ends up. With the primary lengths I need it would site the collector directly under the sump (leaving little ground clearance), so I'll see about wasting a bit of length by heading upwards first to leave the collector in front of the block.
 
Just about to make a start on it now, so will get some pics up as I go along with it
 
Little more from this afternoon then. Almost there with it now:






Surprisingly there's still a fair bit of clearance to the bonnet, but I'll likely heat wrap it just to be on the safe side.
Please excuse the messy workshop, it's long overdue a good tidy up!
 
Ended up one bend short of finishing the header, so will be on with something else in the mean time. Should be back on with this tomorrow.
 
Looks like a very well made exhaust.

Looking forward to seeing how it compares to off the shelf ones.
 
Back
Top