Thoughts about turbo build?


jdmsweden

Horsepower.....
Joined
Sep 15, 2010
Messages
62
Car(s)
JDM H22 swap EG5
Thinking about turbocharge my civic and would appriciate some input on this setup on a b16a:

*Weisco pistons
*Eagle rods
*Supertech retainers
*T04E turbo
*3" exhaust
*Tial WG 38mm 1kg
*ARP Bolts
*Wahlbro 450lph
*RC 1200cc injectors
*Hondata S300
* MSD Blaster SS spole

Some more things have to be done of course but as a start do you have any input? I want iver 350 hp and drive som strip and track.
 
Sounds like a good list.
I'd say that for your power goals the 455 fuel pump and 1200cc injectors might be a bit overkill.
 
Think the injectors are too big pal I would go for around 600 cc or Siemens deka 875cc injectors as that's what I'm goin for
 
Siemens deka must be some of the worst injectors about. Especially the 875s. The spray pattern is terrible and leads to black smoke from unburnt fuel.
The vauxhall guys use them alot.
 
Siemens deka must be some of the worst injectors about. Especially the 875s. The spray pattern is terrible and leads to black smoke from unburnt fuel.
The vauxhall guys use them alot.
And on that bombshell won't be going down that road lol
 
image.png
Ok try these injectors.....
 
Yeah I'd advise against it. You can't even call them an injector imo. More of fuel a delivery squirter lol

Edit: the dekas I mean
 
I've not heard much of TRE tbh so can't pass judgment.
 
If I'm honest Jesse when it comes to injectors I do need pointing in the right direction as I need some myself
 
I'd always recommend injector dynamics but I can understand these aren't in some people's budgets.
I've ran RC before without too much issue. I guess it's more your tuner that's got to deal with you buying **** injectors more than you as the end user.
 
Back
Top