spring suggestion


firebass

firebass

Member
Joined
Aug 15, 2010
Messages
276
hello guys i d like some advice i dont have enough money for coilover so dont bother advice me for that so far i m having kayaba agx with integra springs, gennerally i m satisfied with this setup the shock absorbers working perfect, the springs height is ok in low speeds but in high speeds and during turning it sux , even if its high the wheels are touching the plastics of the fenderes cauzing dmg , so i was looking some springs and the ideal was to make a custom spring from tein or tanabe with the specificiations of height from dc2 springs but very stiff so not to move up and down , the problem is that in my country there is no authorize dealer of these 2 brands so i can order, is there anything else i could try ? as i see so far all springs are to lower i wouldnt mind lower a little but make it hard so to avoid surfind with my car ^^
 
Last edited:
front 4/4 rear 4/8 ionly got problem forward , i found that TEIN can provide springs with whatever specifications u want , that goes with inner diameter , height and KG/mm
so i was thinking of taking 1 pair forward with same height of OEM ones and 1 pair rear with 25mm lowered than oem ones and very stiff about 8kg/mm but the problem is that i dont know the inner diameter and the oem height so i can purchase the appropriate ones
 
You must log in or register to reply here.
Back
Top