spoon calipers twin block with volk rays 15x6.5


No_Fear

No_Fear

Active Member
Joined
Jan 3, 2007
Messages
751
does anyone use this setup WITHOUT spacer ,if yes please post pics and the offset of your wheels

i have 15x6.5 +45 and they dont fit, i need to know the correct offset for 6.5 te37

thanks.
 
From a friend who has had this setup before, he states a 7in TE37 will be required in an offset that is +35mm. Clearance is 0.030.... a little too close for comfort in my book.

Otherwise, get ready for extended studs and spacers for all else.

15x7 rims 5x114.3 in socal - Honda-Tech
 
about 7`` whell i know that ,i want to know in case of 6.5 whells what offset will be ok ?
( i dont like the idea of spaces and extended studs )
 
Any reason you want to stick to a 6.5" rim? Nothing wrong with running spacers and extended wheel studs, in fact the extended wheel studs look pretty good on most setups :nice:
 
i dont like the extended studs to be to big and i dont know if i can find +10mm bigger
i am going to stay with 195/50 so i dont find reason to go 7``
 
No_Fear said:
i dont like the extended studs to be to big and i dont know if i can find +10mm bigger
i am going to stay with 195/50 so i dont find reason to go 7``
Click to expand...

Sorry i don't mean to keep digging but any reason you don't go to 205/50/15? I have always had 205/50/15, my next set of tires are the RE01R in 195/50/15 but from what i have been told they are much wider than 195mm. Anyhow about the studs all the long type lugnuts will cover the entire stud so it will just look like everyother car with long lug nuts :nice:
 
No_Fear said:
do you know if i can find only +10mm bigger studs?
Click to expand...

There is a company i know of that makes fasteners for race teams and aerospace, i have the link on my home PC, surely they could custom make you some, it won't be cheap though, i will post the link on this thread when i find it :nice:
 
from a small search i did i found you can use oem wheel studs which are bit bigger

Front acura TL Studs: part# 90113-SD4-902 +6,3mm
Rear acura TL Studs: part# 90113-SD2-005 +12,6mm
NAPA part# 641-2791 +9,5mm

the best solution if the napa but you can find them only in US
if anyone know an online ship where i can found them please let me know.

this is the NAPA :
balkamp.jpg
 
Last edited:
No_Fear said:
from a small search i did i found you can use oem wheel studs which are bit bigger

Front acura TL Studs: part# 90113-SD4-902 +6mm
Rear acura TL Studs: part# 90113-SD2-005 +13mm
NAPA part# 641-2791 +10mm

the best solution if the napa but you can find them only in US
if anyone know an online ship where i can found them please let me know.

this is the NAPA :
balkamp.jpg
Click to expand...

You can try on both of these stores:Summit Racing – High Performance Car and Truck Parts l 800-230-3030 ; Auto Barn Parts.com: Save on Replacement Parts & Performance Accessories for All Car Makes & Models
 
You must log in or register to reply here.
Back
Top