Spark Plug for Turbo?????


sosolid

Member
Joined
May 16, 2014
Messages
118
What would be the best spark plug for a turbo b18 ? Pushing close to 400hp? Can anyone give spark plug code as well if possible. Cheers for the replies guys.
 
Same plug gapped to .5mm 438 whp 1.5 bar. Using Fuchs Titan pro R 10w50
 
We're all near enough same, I'm gapped to .6mm. Using Mobil 1 10w60, I do a bit of track work though.
 
Theres abit of a theme here lol
Heat range 8 copper plugs at 0.6mm
I use millers 10w/50 also.
 
lol there sure is. I guess i better stick with the theme. So including me there seems to be 6 turbo ek's, based on replies so far. Any more out there?
 
There are hundreds of turbo hondas out there.
I used BCPR7ES. At 1 bar boost. As for the gap i cant remember.
10w 50 in my motor. Run sprints and hillclimbs with it
 
So i got those olugs you guys use and checked the gap on them using my spark plug gauge and they are 0.63 is that ok to install?
 
Use 10/50 oil pal fully synthetic or if u require more infor my mate works for an oil company that supplies oil to Castro, comma and millers if u want to get the best oil pm me your reg plate and he can get exact details of ya car and correct oil, he also supplies me with gearbox oil too no cheap ****, only quality stuff goes in my Audi and civic
 
Back
Top