Rear strut bar Install


nashville

Member
Joined
May 27, 2020
Messages
87
Car(s)
1998 EK9
Long shot. does anybody have a template to cut out the rear panels to install a rear strut brace? ive attached pics on what im talking about, i know MUGEN had some template but i dont want to hack up my mint panels.

thanks in advance

Mugen2.jpeg
Mugen1.jpeg
 
Your best bet will be asking someone like King motorsport in the USA
 
Can't find the template :(
1702841742710.png
 
I have the one for the OEM bar, prob no use really, but maybe it would help if you can measure from there

That Gen 1 Mugen bar is one piece right? The mounts don't unbolt?
 
You have a template for the oem rear bar install?

Not sure if Mugen is one piece or not
 
Yes I can send that OEM template, but that bar sits up a LOT higher compared to the Mugen.

If the Mugen does separate you can bolt it in minus one mount (support it a bit), then it's close enough you can measure and mark the plastic on that side.

I had to do this as I have a sedan and it's different. Also CTR bar not ITR but you get the idea:

412555087_10160939349209788_1677402623482658440_n.jpg

412547814_10160939349194788_433092223059593200_n.jpg
 
I’m wanting to install a miracle Next bar. Not a MUGEN bar- so any template would be helpful
 
Thanks for that, but that is for the integra. They have removable panels.
 
So I have the template. But it’s a picture sent from a buddy.

I’ve attached the pics I have- is anybody savvy enough to take this info and put it into a printable template?
 

Attachments

  • 28D02011-C338-4E0E-B821-4230AE0A6BE4.jpeg
    28D02011-C338-4E0E-B821-4230AE0A6BE4.jpeg
    146.2 KB · Views: 36
  • CB62B937-A202-44B9-ACD0-C787CAC65696.jpeg
    CB62B937-A202-44B9-ACD0-C787CAC65696.jpeg
    520.1 KB · Views: 37
  • 7A8FFCA8-2ABE-49CB-B48A-9A76067647C0.jpeg
    7A8FFCA8-2ABE-49CB-B48A-9A76067647C0.jpeg
    130.2 KB · Views: 33
So I have the template. But it’s a picture sent from a buddy.

I’ve attached the pics I have- is anybody savvy enough to take this info and put it into a printable template?
Get your friend to actually scan it, so its 100% flat. That way you can just print the scan yourself at 100% scale and use it to cut your plastics.
 
Yeah he doesn’t have the sheet. Just photos of it.

Hence why I asked.
 
I'll try find one thats usable dude. Having a good look on Japanese sites.

p2.jpg
 
you could print the image, see how big the A4 sheet he photo'd comes out at and then scale the template accordingly and make one yourself. Wouldnt be too hard to do
 
Back
Top