Post your 1/8 - 1/4 Mile Times Here!


EK9 B16B

15.32 @ 93.2mph 2.70-64ft

Ecu (Apexi)
Free flow filter in standard airbox
Spoon exhaust
4-1 header
Kumho tyres
350lb driver
 
EJ9 with B20VTEC - 13.60 on airport and Federal 595RSR

Mods: RS pistons, Probe rods, BC3+ cams, AEBS mani, 67mm throttle, Toda-style header, 2,5" exhaust (twin loop) - 232KM and 217Nm. All interior striped - 1050kg
 
Ek4 b16a
Itg intake
Rmf header
Decat
skunk2 mega power
Exeedy Stage 1 clutch
Findanza Flywheel
s80

13.8 2.2 60ft
 
Best run this summer on completly bone stock B16A2 @ 19psi with holset hx40
386339_10151061183383137_512084123_n.jpg
 
98 EK9 B16B

15.119 at 92.98mph
2.33 60ft

Full mugen exhaust (original cat)
J's racing induction kit
Spoon clutch
Stripped rear + no passenger seat
Full tank of petrol :(
 
new set up
b18c civic ek
hot weather 30c'

60' - 3.494 & 54.89 km/h
330' - 7.482 & 110.5 km/h
1/8' - 9.504 & 130.0 km/h
1000' - 12.514 & 152.02 km/h
1/4 - 14.481 & 164.3 km/h
 
Friends Girlfriends 99' EK9
bone stock b16b
still running stock airbox, just with the top lid off
running 16" 98 spec ITR rims with nankang street tyres
straight off the street minus the spare wheel

15.1 - 1/4 mile.
can get the rest of the specs in terms of trap speed etc if anyone is interested.
1st time racing as well, and driven by a female!!
 
Eg Fully striped
b18c4
5zigen exhuast mani and full exhuast.
Not mapped
1/4= 14.380
Trap speed=96.03
reaction=.373
60ft=2.284
 
Ek4 b16a
blox v stack
Rmf header
Decat
skunk2 mega power
Exeedy Stage 1 clutch
Findanza Flywheel
s80

13.08 2.1 60ft trap 107
 
That is mind blowing!

Road tyres too.

Bfg or mt et street drag radials and you're well into the 12's on road tyres.
 
Last edited:
13.83 1/4M



EG6
B18C4 Block/Crank, ITR Pistons/Rods
ITR Head, Mini DIY port clean, Cams and Intake.
ITR airbox with old standard filter.
Toda 421, resonated decat and Fujitsubo RM01A.
Spoon ITR ECU.
Part worn 195/50R15 Michelin PE3's
Only removed rear bench, passenger seat and spare wheel.
35L of Fuel in tank. Doh Fail.

Competing all day neck and neck with a 215hp 1.6 106Gti 800kg track car with short box and R888's. His best was 13.55.
 
Sorry my pic of slip is ****..


2a495d5f995c857b4ae196a43613f05a_zps25e15711.jpg


Honda integra dc2
B18c6
Head skim
5 ziegen manifold
Decat
Mugen twinloop cat back
Blox V stac
Mapped on Neptune by Vtec6000 off here

1/4 time was 13.64 @ 105.54mph

Don't have a pic of slip for my civic..

H2b eg6

H22a7
S80 from 96 spec teg R
Rmf copy drag style manifold
Custom 70mm exhaust
3" intake arm with Blox v stac
Mapped on Neptune by Vtec6000 off here

Time is 13.3 @ 107 mph with shifting issue's.. Hoping for 12's next day out
 
1997 civic ex sedan

B16b
Pct Ecu
Vision technical test pipe
Apexi n1 catback
Stock header
Aem short ram
Hankook street slicks 225/50/r14s

1/4 miles times 15.5 due to bogging at launch. Here's a video
DBBFCA2D-8FA3-4F66-94AD-064E8747DAF8-585-00000081C1744F83_zpsfd3fe564.mp4


Just finished installing more stuff

Aem fuel rail
Aem fuel pressure reg
Aem fuel pressure gauge
725cc ID injectors
Walbro 255 fuel pump
Jdm itr 4-1 header
Zex 75 shot.

No times yet due to season over, so gonna wait till next year
 
Last edited:
14.5 @ 95 mph

B16B ek9
Tegiwa manifold, spoon n1 catback
Aem long arm, fidanza 3.4 flywheel
 
13.7 at bishopscourt
Heavy head wind and 32psi in R1R road tyres

2.00 60ft

101mph terminal

B18c mapped by vtec6000
 
Back
Top