My VI-RS (17000km), Supercharged B finally mapped


she’s getting there slowly

A059AA53-6B31-44DE-9C92-F9BF4772A923.jpeg

7437760C-D994-4BD0-A911-34222D17E419.jpeg

95857148-1557-443A-A18E-FDEADD344E51.jpeg
 
Some outrageously awesome parts on this haha. Been following it on Instagram, beautiful motor mate!
 
Loooking amazing dude! So cool to see one of these still about and done so well.
 
Stripped this good working lsd box to take oem lsd out so i can stick it in my built box thats coming out the Ferio due to having a plated diff in there which is doing my head in , same time got CC stage 4 clutch going in , will have my mint ATS plated diff for sale if someone is after one for a track car?

IMG_1994.jpeg

IMG_1995.jpeg

IMG_1996.jpeg

IMG_1997.jpeg

IMG_1999.jpeg

IMG_1998.jpeg

IMG_2001.jpeg
 
Last edited by a moderator:
Thats the bits here and box all built back up, cheers @tegiwa for the clutch, @samuel. At kdn honda works for the new diff bearings and @landrover for the MTF94, only oil that i have ever ran in all my Honda box’s

IMG_2510.jpeg

IMG_2509.jpeg

IMG_2508.jpeg

IMG_2507.jpeg
 
Last edited by a moderator:
Thats the box all built back up, new CC stage 4 clutch fitted, new flywheel spigot bearing fitted that comes in kit with the clutch kit

IMG_2956.jpeg


IMG_2957.jpeg


IMG_2958.jpeg
 
Last edited by a moderator:
Got my Mfactory 4.9 fd removed from my ATS diff and on to the oem diff

IMG_3068.jpeg


Placed the diff in to the casing, got the casing back on with 4 bolts so its nice and tight sealed up, measured the shim clearance

IMG_3069.jpeg


Shim clearance sorted, box opened back up and got all the gears and all fittings back in place, some bond around the casing and all sealed back up ready to go back in the car

IMG_3070.jpeg
 
Last edited by a moderator:
So that’s the ferio gone COP conversion after the dizzy started playing up

First thing I ordered , Billet aluminium coil on plug adapter, Billet aluminium cap block off

IMG_3644.jpeg


Then just drove down to Vtec Knowledge and got him to supply and fit HondaRulez cop kit in my S300




IMG_3496.jpeg

IMG_3497.jpeg

IMG_3645.jpeg


Thats all the bits together, gutted the oem dizzy fitted the wiring and the block off kit

IMG_3646.jpeg

IMG_3647.jpeg
 
Last edited by a moderator:
Got it all wired up and she didn’t wanna fire up lol

So Will at RDT who mapped my car did few changes remotely and got it all back up and running :)

So no more dizzy problems

IMG_3461.jpeg


IMG_3465.jpeg
 
Back
Top