Low position seat rail


EK9dan

B18C-R EK9
Donator
Joined
Sep 23, 2008
Messages
2,542
Alright chappies :D

After sitting in Ians EK9 with his low rails i now NEED them LOL

Ive been looking over the net for a pair or even single ones for now(just driver obviously) as they are pricey!

I havent has too much luck to be honest although ive seen Vtec direct do a set of spoon ones which are £184 EACH :shocked: :shocked: :angry2:

They also do a pair of vision R and that i believe is £177 for BOTH which is alot more competative then the Spoon ones.

* My question is are the Vision R just as low/good? I dont know how good or bad a rail can be really??

* Also if the spoon are lower/better for whatever "good" reason then where can i get a pair or individulally for cheaper then vtec direct as i cannot justify that price by no means what so ever.


PS........ IAN(IJWHITEMAN) Are yours spoon ones?

Cheers
 
I always believed vision R/spoon rails to be exactly the same, I have a dc2 spoon driver's rail in and it's not even stamped as far as i know, it is LOW. lol.

I would keep a look out for a used one, the Price of the YEN has really killed things atm :nono:
 
My BC low frame was about £100 - you have sat in that also :p
 
Mine is broken at the moment though, not sure of the problem, havnt had time..
 
PS........ IAN(IJWHITEMAN) Are yours spoon ones?

Yes mate Spoon they be. I 'm pretty sure the visons are the same. Just charge your passsengers 5 pounds for every time they use the seat till you make the money back..... Problem solved! :nice:

:p
 
my friend had the super low Vision for the stock Recaro in his DC2-R...it's a good rail.

seating position was much better imo.
 
Perfect, thanks for the feedback everyone. I can justify the price for the visions as you do get both rails.

I cant afford to buy the spoons at that cost. Even if i could i wouldnt. Thats a horrible price :(

Im gona go for the Vision R as i like the price and you get 2 for that price. I will confirm when before i buy though.

Thanks again
 
Yes mate Spoon they be. I 'm pretty sure the visons are the same. Just charge your passsengers 5 pounds for every time they use the seat till you make the money back..... Problem solved! :nice:

:p

Ian your just a SPOON PIMP!
 
Perfect, thanks for the feedback everyone. I can justify the price for the visions as you do get both rails.

I cant afford to buy the spoons at that cost. Even if i could i wouldnt. Thats a horrible price :(

Im gona go for the Vision R as i like the price and you get 2 for that price. I will confirm when before i buy though.

Thanks again

Last year i got both spoons for the Vison price. The Exchange rate has screwed everything up. But having said that if i had known vision where available i wouldn't have bought the spoons.

Ian your just a SPOON PIMP!

You got that right :D
 
I'll swap a standard one for a bride low rail - you just have to pay the £10 postage and send me yours

Johnny
 
Perfect, thanks for the feedback everyone. I can justify the price for the visions as you do get both rails.

I cant afford to buy the spoons at that cost. Even if i could i wouldnt. Thats a horrible price :(

Im gona go for the Vision R as i like the price and you get 2 for that price. I will confirm when before i buy though.

Thanks again

Sorry to disappoint you mate, but the Vision R ones on VTEC Direct, I believe are £177 EACH, not for a PAIR.

I thought exactly the same a while back, that they were basically half the price, however when I spoke to Bazza to enquire about it, he said they were £177 EACH, not for a PAIR. Best of speaking to Andy before you place an order :secret:
 
Funkypower does them for £170 each so saving £28 + free delivery since you are an EK9.org member. I guess you wanted an even lower price.
 
You could also look into HKS kansai, these actually lock the seat on both sides. Better sefty than spoon / visions as they only lock your seat on one side.
 
Thanks again guys

@Joshm88, You are indeed correct buddy, i found out a few days back after inquiring about it, what a bummer! Cheers for the heads up on that :nice:
 
I'll swap a standard one for a bride low rail - you just have to pay the £10 postage and send me yours

Johnny

Hi Johnny,

Im definitely interested in this. So i assume the bride low rail also just bolts straight up to standard recaros? Is seating position nice? Sorry, only one ive sat in was the spoon one i mentioned and want it to be the same if not very similar to that.

Anyone with any experience with the bride low rail?
 
Sorry to disappoint you mate, but the Vision R ones on VTEC Direct, I believe are £177 EACH, not for a PAIR.

I thought exactly the same a while back, that they were basically half the price, however when I spoke to Bazza to enquire about it, he said they were £177 EACH, not for a PAIR. Best of speaking to Andy before you place an order :secret:

I emailed VTEC Direct yesterday and they still haven't gotten back to me, website does say "Rails" so they really should change it!

Ive emailed a company in Japan for 2 Technica Sport VISION One Touch Seat Sliders and after shipping I am hopefully looking at about £200.

Anyone got these fitted?

Also has anyone seen or fitted the FEELS low position rails as they seem to be the most expensive at about £250 EACH. Whats so speacial about them?
 
I'll swap a standard one for a bride low rail - you just have to pay the £10 postage and send me yours

Johnny

What BRIDE Rail is it as I was unaware you could use them to fit the stock Recaros?

Tried searching on the net and couldn't find any info.

Thanks
 
Back
Top