k20 vti-s mb6


Vti-s chris

k20 vti-s
Donator
Joined
Feb 28, 2011
Messages
511
hi all this is my build thread. it all started with a pretty standard mb6 vti-s, my plan was to run a b18c with jrsc but that all changed lol. i have been building this car for a while now and its getting near completion so i thought i would start this build thread. now to the pics


this is the underside stripped back, sandblasted, patches welded in, seam welded, etch primed and seam sealed


primed


all suspension arms were sandblasted, powder primed and painted


the colour of the floor pan, it was then coated in clear waxoil


shell rubbed down and primed


the car painted ep3 cosmic grey


new brake lines made up


engine in


as it sat when i left it in to get wired


my list of what i am running

Dss 2.9 shafts
Hybrid racing wiring harness
Hybrid racing fuel line kit
Hybrid racing fuel rail
Hybrid racing fuel pressure regulator
Hybrid racing fuel pressure gauge
Hybrid racing race manifold
Hybrid racing shifter cables
Hybrid racing shifter box
Hybrid racing power steering kit
Hybrid racing clutch line
Hybrid racing radiator hoses
Hybrid racing 70mm throttle body
Fd2 RRC intake manifold
Hybrid racing mounts eg/dc2
Hybrid racing radiator and fan
K20a and box
energy suspension bushes
blueprint rta bushes
blackworks rear camber and toe arms
buddyclub front camber arms
buddyclub extended ball joints
hsd coilovers
5 stud conversion
blackworks extended wheel studs
blackworks neo steel wheel nuts
zerg industries bonnet dampers

there is more but i cant think at the minute. ill try to keep you lot posted on progress cheers
 
Awesome! Like where this is going! Looking forward to seeing some progress. :nice:
 
Wow very nice, glad to see my old 9 is still going strong. :)
 
How you finding the fittment anf quality of the hybrid racing stuff? What's the sump clearance like on the HR mounts?
Going k20 in my dc2 over the next few months and starting to look at which parts to go with.
Build looks great with you, guna be a minter when finished
 
Hybrid stuff is pretty good the only thing I don't like I the bolts that come with the shifter box are cheap crap and started to rust already! As for sump clearance it is only just below the front towing eyes so not that bad. Do your research on parts and find out which ones will Work with your budget, a word of warning it is not cheap lol
 
How do you find the shifter box itself when fitted?
Much play when in gears? And how do shifts feel?
Dose there race manifold hang low at all?
Thanks for the info mate! Trying to take in who's using what parts and what they think of them but it's abit confusing haha. Yeahh iv realised it's not that cheap :/
Hoping it will be worth it when done though!
 
I have the shifter box and cables, you get stiffer springs for the box. There is no oil in the box at the min but then shifting it feels firm and solid I'll let you know more when I get it on the road. I haven't fitted the manifold yet but I'll post up pics etc when it's done.
 
Mega mate.

Some amount of work there.

So wish I had the space to get stuck into stuff like that.
 
Mega mate.

Some amount of work there.

So wish I had the space to get stuck into stuff like that.

I know I would hate to count up the hours and late night's I spent on the car. I am renting a lockup to do all the Work not. The cheapest way but had no other option.
 
Nice project, can't imagine there is many mb6 civic's with k20 running gear
 
Coming along very well mate, 10/10 for effort on the whole underside etc!

Hybrid racing stuff looks great in the k-swaps too, look forward to seeing it running
 
Coming along very well mate, 10/10 for effort on the whole underside etc!

Hybrid racing stuff looks great in the k-swaps too, look forward to seeing it running

Thanks Stephen. You and me both can't wait to get it on the road.

Thanks for all the comments guys:bow:
 
lovely build mate will be keeping my eye on this :nice:

love Mb's ave had few myself lol
 
I'll be calling on you to map it for me good sir lol there is only 2 that I know of the other is a k26 lol

Sure thing. Let me know if you need any help with questions along the way, I done a K swap into a DC2 not long ago:nice:
 
Back
Top