k20 into ek9

[lyle robb]

Im planning on converting my ek9 from b18 turbo to k20. I know i need mounts,shafts header and gear likage but im not sure on the wiring? Can any1 help me with this? Thanks

 

[Cesare]

K20a.org is your friend

 

[689R]

You need your ODBD2A/B interior loom depending on whether your car is prefacelift or facelift.

Then you need the K20 engine loom.

Then to connect the two you need a conversion harness available from Hybrid Racing, R-Motion, Tegiwa Imports etc.

 

[Maffy]

As for the charge harness and your wiring for the battery and fuse box, you will have to make this up yourself, however it really is straight forward if you know your way around your EK9.

 

[grimo35]

all of the wiring can be found on hondatas website alot of the info you get from k20a.org etc is for usa ecus so the pint outs are different

 

[K24_EK9]

im keeping my eye on this.

 

[chi-tec]

i have ekk1 hybrid racing shafts if you plan to go that route!
but many go for the dc2 subframe ekk2 setup!
let me know!