fuse box (under hood) problem..


zeff

zeff

Member
Joined
Jun 8, 2009
Messages
738
hi guys..i hope everyone is doing fine..recently my engine have thrown a code 20.. while i was looking on the fusebox this is what i have seen...
$fuse.jpg

any one here happen to have a copy of the fusebox diagram on a d15b engine?

on my fusebox there is no diagram.. i have used google and unfortunately there are a lot of images for the fusebox diagram:((

the blown/melted fuse is for what?

could this be causing the code 20?

thanks for the reply and Godbless:nice:
 
Fook ne that is one melted fuse. I'll dig out my manual when I get home and I'll upload it on here for you...hopefully with some sort of translation from electrical talk to English :nice:
 
thanks a lot sid.. youre really a big help..
by the way have got any idea why it melted?
 
Not a clue mate. More than likely a short circuit somewhere. Have you checked the wires coming from your O2 sensor? As on that link I sent you one of the guys said that his had been shorting out which may have caused it
 
i have checked my 02 sensor and it was unplugged from the socket..i have attached it and its o.k now..ill be looking for a electrician this week end to check on that melted fuse..i hope its not a lot to fix =(
 
the fuse was a 20 amp its for the condenser fan.. the previous owner may have installed an ordinary fuse that resulted to this melting..good thing only the above layer was melted..the electrician cleaned up the melted part, so no need for fuse holder...he did a pretty good job..i havent tried to check my CEL if it is still throwing code 20..a bit busy at the moment..ill update asap..

thanks again sid-ek9 for the replies.
 
You must log in or register to reply here.
Back
Top