Front caster/camber adjusters.

[Eoghain]

Hi lads,

I was sick of seeing the adjustable balljoint type adjusters moving while several civic rally cars I looked were mid stage, so I designed my own! Basically it's a very simple idea the modifys the stardard wishbone.

Below are pics of the wishbones:

Basically works by welding on a retailing ring and then using offset holed washers to place the wishbone at whatever angle you want. The kit comes with 0mm (standard Honda camber) 1mm,2mm and 3mm offset. Giving almost 3 degrees camber (total)

Any questions or want a set give me a shout!

 

[Ramvtec]

Eoghain is that you, I did 1st year with you in LIT its JP?

 

[elchunk]

Its not exactly easily adjustable but its still a nice concept, just get your desired camber and then weld it in place.

 

[Eoghain]

Its not exactly easily adjustable but its still a nice concept, just get your desired camber and then weld it in place.

I haven't come across well, they are adjustable, there is a outer oval welded on, the washer can be removed when the bolts are removed, so you can play around with settings! Sorry I shoulda been clearer!

 

[JDP]

I understood you bro, to change your offset simply swap the washers for desired camber

 

[Frodo]

That's a pretty cool design like

 

[Eoghain]

I understood you bro, to change your offset simply swap the washers for desired camber

Exactly!

 

[Eoghain]

That's a pretty cool design like

Thanks man!

 

[HondaNickx]

If all the adjustable ball joints would just use serrated grooves your problem would be fixed.Easy to do and impossible to slip.
The bisimoto cam gear uses the serrations too to lock their cam gears in place.