Hi,
I'm trying to get an idea of what my track/race car is worth as I am a bit out of touch with values.
Spec and pics are below and it runs and drives great.
It has a v5, chassis plate etc and could be made road legal as all lights etc are still in place.
Any body any ideas of what it is worth? Thanks
Honda B18C 1.8L DOHC VTEC engine
Jenvey SF48 taper individual throttle bodies
ITG air filter
Pico injectors
Spoon plug leads
Thermal intake manifold gasket Modified valve cover with extra breathing ports
Fully ported and skimmed head Crower stage 3 race camshafts Titanium spring retainers
Uprated dual valve springs Brian Crower adjustable vernier cam pulleys
ARP head studs
Supertech valves and stem seals
Cometic MLS head gasket Block decked, rebored and honed to match pistons
JE 12.5:1 high compression forged pistons
Total Seal piston rings
Brian Crower forged con-rods
ARP con-rod bolts
King Racing XP-series rod bearings, main bearings and thrusts ARP main studs
Lightweight crank pulley
Walbro 255lph fuel pump Adjustable fuel pressure regulator
Moroso baffled sump
Solid mounts
OBP crankcase breather kit MFactory
4-2-1 exhaust manifold & decat BuddyClub ProSpec 2.5” exhaust
Aluminium radiator
Samco silicone hoses
Mocal oil cooler with thermostatic take-off
Honda S80 gearbox 4.9 final drive Close-ratio gear set with Mfactory plate LSD
Exedy ultra lightweight flywheel
ACT 4 paddle race clutch
ARP flywheel & pressure plate studs
Quick shift gear stick
DSS 2.9 drive shafts
I'm trying to get an idea of what my track/race car is worth as I am a bit out of touch with values.
Spec and pics are below and it runs and drives great.
It has a v5, chassis plate etc and could be made road legal as all lights etc are still in place.
Any body any ideas of what it is worth? Thanks
Honda B18C 1.8L DOHC VTEC engine
Jenvey SF48 taper individual throttle bodies
ITG air filter
Pico injectors
Spoon plug leads
Thermal intake manifold gasket Modified valve cover with extra breathing ports
Fully ported and skimmed head Crower stage 3 race camshafts Titanium spring retainers
Uprated dual valve springs Brian Crower adjustable vernier cam pulleys
ARP head studs
Supertech valves and stem seals
Cometic MLS head gasket Block decked, rebored and honed to match pistons
JE 12.5:1 high compression forged pistons
Total Seal piston rings
Brian Crower forged con-rods
ARP con-rod bolts
King Racing XP-series rod bearings, main bearings and thrusts ARP main studs
Lightweight crank pulley
Walbro 255lph fuel pump Adjustable fuel pressure regulator
Moroso baffled sump
Solid mounts
OBP crankcase breather kit MFactory
4-2-1 exhaust manifold & decat BuddyClub ProSpec 2.5” exhaust
Aluminium radiator
Samco silicone hoses
Mocal oil cooler with thermostatic take-off
Honda S80 gearbox 4.9 final drive Close-ratio gear set with Mfactory plate LSD
Exedy ultra lightweight flywheel
ACT 4 paddle race clutch
ARP flywheel & pressure plate studs
Quick shift gear stick
DSS 2.9 drive shafts