Hey, guys its been a while since ive been on here.I've done a couple of things with my car but i dont have a full shoot yet but I will soon any who here's the specs then pics.
Ej6
-96 Civic DX, US chassis code EJ6
-Original Midori Pearl
Exterior
-CF hood with sparco hood pins holding it down due to broken hood latch
-Oem ctr wing
-First molding in Frp
-SiR headlights-New upgrade from Us version
-Ek9 side markers
-OEM mudgaurds
-Enkei Rfp1-15X7 +41 205/50/15 with 5mm spacer in the front
-ARP extended studs on the front for now
-Project Kics R40 neo chrome lug nuts
-EBC slotted front rotors
-Hid lights
Suspension
-Ksport Control Coliovers- old version
-F7 Limited edition gold control arms
-ASR subframe brace
-Beaks Lower tie bar
-Rear disc conversion
-Front/Rear sway bar (comming soon)
-Energy suspension master bushing set (comming soon)
Interior
Mostly stock except for these things
-1995 Red Recaro SRDIII Velour edition
-SiR cluster with Carbon bezel
-Momo competion steering wheel (yellow stitching)
-Nrg Quick release
-Nrg short hub adaptor
-Circut HERO Neo chrome shifter extender
-Ek9 shift knob
-Ctr shift boot
Engine/Exhaust
-B18C1 Block B16 Head
-AVID Billet aluminum mounts 75a
-S80 Transmission Non LSD-sucks
-Usdm ITR pistons A0 P73
-Hytech Tri Y replica header
-Cx racing Dual core radiator
-Apexi World sport exhaust 2.5 piping
-Spoon cam gears zero setting for now
-P28 Ecu chipped and tuned on chrome
I have yet to dyno the engine how it is.
Compression in cylinders are 210,215,210,210
The head will be rebuilt soon here is what i have so far.I have the itch to put it all on but i am short on funds for the moment so i try not to think about it.
This will probably be done in the fall.
-skunk2 alpha 70mm throttle body
-B16a2 intake manifold port matched and ported and polished runners
-Supertech dual valve springs
-Supertech titainium retainers
-Supertech valves dished
-Supertech valve guides
-Supertech valve seals
-Stp-R fuel rail with steel braided line
-Blox fuel pressure regulator
-Fuel gauge
-00 spec ITR camshafts
-Rc 310 injectors (will be ordering next)
-Walboro 255 fuel pump (will be ordering next)
The head will be port and polished before the install of these parts
Before the SiR headlamps
ASR,F7 LCA,Beaks Tie bar
Lugs
The boot is a bit dirty
Dont mind the paint on the bumper. I had to redo it i didnt prep it good enough.
Took some pics with my friends CRX
Ej6
-96 Civic DX, US chassis code EJ6
-Original Midori Pearl
Exterior
-CF hood with sparco hood pins holding it down due to broken hood latch
-Oem ctr wing
-First molding in Frp
-SiR headlights-New upgrade from Us version
-Ek9 side markers
-OEM mudgaurds
-Enkei Rfp1-15X7 +41 205/50/15 with 5mm spacer in the front
-ARP extended studs on the front for now
-Project Kics R40 neo chrome lug nuts
-EBC slotted front rotors
-Hid lights
Suspension
-Ksport Control Coliovers- old version
-F7 Limited edition gold control arms
-ASR subframe brace
-Beaks Lower tie bar
-Rear disc conversion
-Front/Rear sway bar (comming soon)
-Energy suspension master bushing set (comming soon)
Interior
Mostly stock except for these things
-1995 Red Recaro SRDIII Velour edition
-SiR cluster with Carbon bezel
-Momo competion steering wheel (yellow stitching)
-Nrg Quick release
-Nrg short hub adaptor
-Circut HERO Neo chrome shifter extender
-Ek9 shift knob
-Ctr shift boot
Engine/Exhaust
-B18C1 Block B16 Head
-AVID Billet aluminum mounts 75a
-S80 Transmission Non LSD-sucks
-Usdm ITR pistons A0 P73
-Hytech Tri Y replica header
-Cx racing Dual core radiator
-Apexi World sport exhaust 2.5 piping
-Spoon cam gears zero setting for now
-P28 Ecu chipped and tuned on chrome
I have yet to dyno the engine how it is.
Compression in cylinders are 210,215,210,210
The head will be rebuilt soon here is what i have so far.I have the itch to put it all on but i am short on funds for the moment so i try not to think about it.
This will probably be done in the fall.
-skunk2 alpha 70mm throttle body
-B16a2 intake manifold port matched and ported and polished runners
-Supertech dual valve springs
-Supertech titainium retainers
-Supertech valves dished
-Supertech valve guides
-Supertech valve seals
-Stp-R fuel rail with steel braided line
-Blox fuel pressure regulator
-Fuel gauge
-00 spec ITR camshafts
-Rc 310 injectors (will be ordering next)
-Walboro 255 fuel pump (will be ordering next)
The head will be port and polished before the install of these parts
Before the SiR headlamps
ASR,F7 LCA,Beaks Tie bar
Lugs
The boot is a bit dirty
Dont mind the paint on the bumper. I had to redo it i didnt prep it good enough.
Took some pics with my friends CRX