BREAKING: Vince's 260bhp K20 EK fun machine - First Moulding/Voltex/Hybrid Racing/ETC


Vince

Member
Joined
May 19, 2009
Messages
285
Item for sale: See below
Reputation: http://www.ek9.org/forum/reputation-center/51818-vince.html
Price: See below
Paypal?: Yes
Location: Devon TQ4
Condition: See below
Description: See below
Pictures: See below

Breaking price list:

I think I've priced things fairly cheap though, as I'd like to get stuff shifted soon.


K20A2 + box - £1500 £1300 £1000! - DEPOSIT TAKEN
RBC + throttlebody - £200 - SOLD
Injen induction arm, air filter + hydroshield - £150 £100
Ktuned tucked fuel + FPR + inline fuel filter - £150 - SOLD
Driveshaftshop 2.9 driftshafts - £250 - SOLD
Hybrid Racing billet Kswap mounts - £300 - SOLD
Hybrid Racing shifter box + cables - £400 - SOLD
Hybrid Racing exhaust manifold - £250 - SOLD

3" exhaust system with two silencers (need internal fuel cell) - £250 £200 £150
Hondata Kpro with TDI North 260bhp map - £700 - SOLD
PasswordJDM 3 point strut tower bar - £250 £220 £180
Brides (presumably replica) - £1000 - SOLD
2 x Takata 4 point harnesses - £400
TEGIWANK Xbrace - £100 - SOLD
Flocked EK9 interior (EK9 dashboard, EK9 door cards with Bride arm rests, centre console) - £500 £400
Rota Grids 16x7 with R888 tyres (low tread, ok for track) - £350 £320
Rota Grid Drifts 15x8 with T1R tyres (good tread all round) - £350 £320
HP Racing 6 pot calipers + 300mm drilled/grooved discs - £500 £450
Spoon style carbon fibre spoiler - £100 - SOLD
Spoon style mirrors - £50 - SOLD

GT wing - £400 £350
Carbon fibre boot + recess + tinted window - £350 - SOLD
First Molding carbon fibre front lip - £500 £400!
Voltex carbon fibre canards - £300 £280
Cusco 6 point roll cage - £450 - DEPOSIT TAKEN
Carbon fibre side skirts - £200 £150 £130
EK9 wind deflectors (missing some clips) - £80 £50 £40
MeisterR coilovers - £300 £280 - SOLD
Brand new unfitted 20 litre fuel cell - £100 £80
Walbro 255 external fuel pump - £100 £80
Ktuned throttle position sensor brand new - £80 - SOLD
Radiator - £50 - SOLD



General car information:

This is a hard thread for me to write, I've not considered selling/breaking the EK until recently... I always intended to keep this car forever, but it's just not viable really is it. This was my first car.. I've owned it just shy of 7 years now. I've poured so much hard work, time and money into this car, I will be sad to see it go!

This EK is far from perfect condition, it's a little rough around the edges. The paint is matt black (though professional sprayed in a booth). It has been built to be enjoyed and it has been! I'll be honest with why I'm selling... I feel it's time to move on, I rarely use it anymore, though I have kept it MOT'd, taxed and insured. I miss my turbo, and have considered turboing this engine on and off since before it was fitted, but I know that this would bring more hassle, and I can't justify spending anymore money on it. It also would be a shame to turbo it when the car is perfect as it is, it's fast and fun and works. I also am very busy now with my film career and also starting my masters degree soon, due to this I just haven't had the time for it.

The K20 was professionally installed by Endless Horizon Motorsport, and tuned by TDI North in combination with the breather modifications to make 255bhp and 185lb/fb, which isn't shy to say the least. I have since then had a custom full 3" exhaust system made by ituned which sounds and looks lovely, and should have freed up a bit more power.

The engine is on around 45k, having around 40k when fitted at Endless Horizon Motorsport. The chassis is on around 130k. This car has been through quite a build, I bought it near stock, and have since driven it with 6 different engines- it has had D series N/A and turbo, B series N/A and turbo and K series- I've pretty much tried them all. The chassis has been solid though, I've never had any problems with rust, it has never been in any collisions. I have owned it since 2005.

Quick run down on the specs:

K20A2 engine and box
RBC intake manifold
Injen air intake
Hybrid Racing EKK2 mounts
Hybrid Racing shifter box
Hybrid Racing shifter cables
Hybrid Racing budget header
3" exhaust system
Driveshaft Shop 2.9 shafts
Hondata K-Pro ecu
Ktuned tucked fuel rail
Ktuned FPR with black fuel lines
Braided fuel lines
Optima Yellow Top battery with battery strap
Battery kill switch and circuit breaker

16x7j Rota Grid wheels
Skunk2 extended wheel nuts
195/50/16 Toyo Proxes R888 tyres
300mm drilled and grooved discs
HP Racing 6 pot calipers
Braided brake lines
MeisterR coilovers
Endless Horizon custom built tucked engine loom
Headlight loom tucked
Brake lines tucked
Braided clutch line tucked
Fuel filter tucked
Vacuum lines tucked
Radiator overflow tucked
Gearbox earth tucked
Battery relocated
Fusebox relocated
Washer bottle relocated
Power steering pump/reservoir removed
Rocker cover earth removed
All unnecessary brackets, bolts and clips removed
Engine bay shaved, smoothed and painted pink
Rear wiper removed
Radio aerial removed and smoothed
Remote battery terminals in fuel cap
Password:JDM 3 Point Front Strut Tower Bar

EK9 flocked dashboard
EK9 dials
EK9 flocked door cards
EK9 flocked centre console
Bride trimmed arm rests
Bride trimmed gear gaiter
EK9 style 6 speed gear knob
DC2 steering wheel
Bride Gias Low Max seats (replicas I think)
Takata 4 point harnesses
Stripped out, carpeted
Fuel cell in boot
Tegia rear X-Brace

Full respray in matt black
Facelift front and rear end
First Moulding Fugel Plate front lip spoiler
Voltex Super M carbon fibre canards
Front diffuser & tie bars
EK9 grille
EK9 rear lip
Seibon OEM carbon fibre boot
GT rear wing (carbon side panels)
Roof skinned in carbon fibre
EK9 headlights
EK9 facelift rear lights
EK9 wind deflectors
Spoon wing mirrors
Tilted and angled backbox
1.4i badge on boot

Photos:

6970658454_76b70c6bfd_o.jpg


7129753255_5f15d04068_o.jpg


7129753549_57fecb9c16_o.jpg


7126300109_9ff8629726_b.jpg


7bd725df.jpg


6843387162_7f4fe77f9c_o.jpg


6526673741_67e33674c8_o.jpg


6cdb3066.jpg


9ad3daa4.jpg


4bec234e.jpg


9a071278.jpg


Here's some not so fancy shots from my phone:

ccac4fbb.jpg


44c11bc0.jpg


205333_10150982394634335_312510370_n.jpg


552623_10150894053451895_1864239052_n.jpg


I have a LOT of photos, so if you have any requests of anything then just ask.

Videos:



Please give me a PM if you have any questions or offers.

All these prices are COLLECTED. I'm based in Devon TQ4 - so pop down, knock me down on the price, come for a spin in the S15 and we'll have some biscuits. I can't be ****ed to wrap stuff up and post it and risk **** being broken, so hop in a car with a mate and have a fun road trip. Anything else you want that isn't on the list please post in the thread.
 
Last edited:
you're breaking this :shocked: no luck selling it as one then
 
Sick car with some mega parts!

Shame to see another one being broken though. Good luck with selling, parts shouldnt hang around long
 
Wierd enquiery but, would you be willing to sell the little rods that go from your front bumper to your diffuser?
 
The GT wing comes with the baseplate and adjustable tilt brackets, bolt on for EK9! It is FRP with carbon fibre end plates.

The little rods will be sold with the front bumper setup, but if you're looking for some, look up 'tie bars', I bought these from carbonmods.
 
Thanks vince :nice: top man been hunting but didnt know what exactly to search for!
 
Please create a reputation thread or this for sale thread will be deleted
 
Sorry I wasn't quite sure what it was until I looked into it just then haha. Sorted!
 
Are your rear lights avalible? Or your old pre facelift ones? As smashed one of mine doing a stage rally yesturday :-(
 
I like the fuel cell mate! Not practical for me tho. Glws
 
Seriously guys... this stuff needs to gooooo


3" exhaust system with two silencers (need internal fuel cell) - £250 £200 £150 OFFERS?
2 x Takata 4 point harnesses - £400 OFFERS?!?
Rota Grids 16x7 with R888 tyres (low tread, ok for track) - £350 £320 £290ffff
HP Racing 6 pot calipers + 300mm drilled/grooved discs - £500 £450 £350fffffffffsake
First Molding carbon fibre front lip - £500 £400! £300?!
Voltex carbon fibre canards - £300 £280 £200?!
Cusco 6 point roll cage - £450 £350....**** it
Carbon fibre side skirts - £200 £150 £130 £100fuckit
Brand new unfitted 20 litre fuel cell - £100 £80 FREE WITH ANY OTHER ITEM
Walbro 255 external fuel pump - £100 £80 FREE WITH ANY OTHER ITEM
 
Im interested in the fm front lip, Any marks on it? Can you pm me some photos and a price delivered please
 
Which model Cusco cage is it?
Does it have diagonals or harness bar or door bars?
Cheers
 
Civicstan, the lip has no marks it's like new. Don't have any pics sorry, it's still attached to the bumper/metal diffuser. If you collect you can have those for free with it- see photo.

This is the cage, sorry I don't know the model!
 

Attachments

  • 13042010053.jpg
    13042010053.jpg
    93.2 KB · Views: 625
  • 6970658454_76b70c6bfd_o.jpg
    6970658454_76b70c6bfd_o.jpg
    453.8 KB · Views: 1,446
Back
Top