usy Member Joined Sep 21, 2011 Messages 122 Jul 5, 2014 #1 doing a brake conversion on my ej6 coupe changing full front and rear hubs to mb6 vti hubs. wanted to know will my d16 drive shafts fit the mb6 hubs isit 32mm drive shafts and will the splines on the shafts fit in. for any help
doing a brake conversion on my ej6 coupe changing full front and rear hubs to mb6 vti hubs. wanted to know will my d16 drive shafts fit the mb6 hubs isit 32mm drive shafts and will the splines on the shafts fit in. for any help
kellsled Phil Joined Dec 12, 2008 Messages 3,737 Jul 5, 2014 #2 Not sure if they will fit but you could prob use the mb6 outers
Sam121 Member Joined Jul 11, 2013 Messages 165 Jul 7, 2014 #3 am sure you have to use mb6 drive shafts as i did on my ej9 but a full engine conversion was carried as well as a brake conversion, so not really sure
am sure you have to use mb6 drive shafts as i did on my ej9 but a full engine conversion was carried as well as a brake conversion, so not really sure
usy Member Joined Sep 21, 2011 Messages 122 Jul 7, 2014 #4 thanks guys was not to sure I do have a full b18c4 conversion as well as the brake conversion but wanted to do the brake conversion first.
thanks guys was not to sure I do have a full b18c4 conversion as well as the brake conversion but wanted to do the brake conversion first.
Sam121 Member Joined Jul 11, 2013 Messages 165 Jul 23, 2014 #5 You would be best off using the mb6 drive shafts and also to improve handling id advise you to use arbs front and back would help a lot with handling
You would be best off using the mb6 drive shafts and also to improve handling id advise you to use arbs front and back would help a lot with handling