Torque mount brackets are all painted and on the engine. Look so good!

Thought I might aswell repaint the rocker cover which I have (VHT WRINKLE BLACK). Looks great.

The engine is now finished apart from valve clearances (can do when the engine is in the car) and cambelt kit which I will do tomorrow. Have had a nightmare trying to get that crank pulley nut off :angry2:

Picking up my bonnet and bumper from wrapping this week so I can get the splitter and bits all mounted on and fitted.

PLEASE NOTE: I am aware that I painted the threads where the oil cap screws in, I’ll block this off and clean the threads up tomorrow.

E34E15CB-895E-45DE-9076-C1DD4894ABA6.jpeg

62EB7124-6EB8-4FF3-9FC8-B49453742E80.jpeg

85DE4812-659B-44D1-8714-7643A1BA542C.jpeg


FE484245-9FDA-47B4-BF83-BCE52EE0B80E.jpeg

608CBA90-4C60-41CF-AC3D-AF18BAB3FD8E.jpeg

Have started fitting the wings and arch liners. Using my new skunk2 hardware for all the wings. Love it !
2DD115AC-7968-40EF-BBDE-12B6EC792315.jpeg
 
Engine is now completely finished! :beer::dance:

Fitted my cambelt and tensioner today, rocker cover on, new spark plugs in, NGK HT leads, carbon plug cover and new tegiwa rocker nuts fitted.

Just need to paint the gearbox, fit the clutch and flywheel, fit the box and it’s going for mtonthe new shell!

Trying to fit these BYC skirts. They look so good I love them.

I am picking up my bonnet and front bumper from vinyl wrapping at the start of next week and then I can get the splitter and everything fitted and onto the car

776727AE-2F0C-4E8B-9010-7C890E6A210E.jpeg

34C69994-A3A8-490F-A726-27C97F1EF63B.jpeg

16D6AE10-4FBC-404E-85C3-51F4C9AE4C0A.jpeg
 
Engine loom and exhaust manifold now fitted. Nothing left to do on the engine until I know everything runs again as it should. Bit worried about having a preface loom with a facelift b16a2. Not sure if I’ll need to use a different dizzy yet.

Tidied up my unit and have more space now .

Need to get the box painted on Sunday and mounted to the engine with the new clutch and flywheel and then it can go into the shell finally!

Also fitting my HEL braided brake lines, HEL braided clutch line and my braided PAS Delete loop kit on Sunday

0254B3ED-55EC-4544-BACC-A302E6317AB8.jpeg

086C78C0-91B7-4080-85FA-575D6982ED84.jpeg

8189BA28-770C-4852-AF96-A61C8FAAC4EE.jpeg

16FE2FEF-5F15-44AE-9200-BFA0C34DEC73.jpeg
 
Back
Top