Anyone had these Injector seals?


wizardmanjm

Member
Joined
Apr 1, 2019
Messages
80
Car(s)
Yellow EK9

They seem quite cheap for the whole set, can anybody clarify if they are crap or up to the job?

My 2nd Injector seems to have started leaking quite a lot.

I plan on unplugging the fuel pump, running the car till it cuts out. Removing the fuel rail and then just changing the seals on that one injector then keep the others as spares. This way I shouldn’t have to replace the washers for the banjo fitting

Can anyone see an issue with this method? Never done injector seals as most my projects have never had injectors lol

I tried tightening the fuel rail a bit but it still leaks

Cheers
John
 
Hi Everyone I assume nobody has used the above site for seals

I’ve fixed the injector leak today and all is well so the seals seem fine for now.

First time for me and the first o ring seal that I used split as I was fitting the injector. so it leaked again.

2nd attempt I used a Silicone lubricant on the seal before fitting the injector, worked a treat
 
Back
Top