Tegiwa Imports
EK9 Dealer
- Joined
- May 20, 2007
- Messages
- 2,717
We're the European distributor for 949Racing, they're a lightweight flow form wheel brand which were actually designed for the Miata/MX5 crowd, but being 4x100 they also fit Civic etc.
This current design (Gen4) has the same great style as all previous 6UL's but features a flow formed outer rim barrel for a better strength to weight ratio and lower rotational moment. The entire wheel was redesigned from ground up to further enhance controlled dissipation of loads and increase fatigue life. The specification of the wheels are 15x8 with an offset of +36, 4x100 bolt pattern and 67.1mm center bore. Each wheel weighs in at 5.27kg (11.6lbs) thanks to the low-pressure cast, flow formed monoblock construction. The double valve hole design is better suited to the enthusiast filling up with nitrogen allowing natural air to be released as nitrogen enters the tyre. They also feature a recess to the rear to allow fitment with hubcentric wheel spacers. They are available in a range of colours finished with durable paint and clear-coated finish. Please note that valves are not included, these can be purchased separately on our site.
Fitments available 15x8 & 15x9 with 17's coming soon for S2000, EP3, DC5 etc.
Prices start from £660 delivered for a set of 4.
Available in 5 colours : TUNGSTEN, CHARCOAL, NICKEL, SILVER, and BRONZE.
Find your wheel here... http://www.tegiwaimports.com/wheels/949-racing.html
Thanks
TEGIWA
This current design (Gen4) has the same great style as all previous 6UL's but features a flow formed outer rim barrel for a better strength to weight ratio and lower rotational moment. The entire wheel was redesigned from ground up to further enhance controlled dissipation of loads and increase fatigue life. The specification of the wheels are 15x8 with an offset of +36, 4x100 bolt pattern and 67.1mm center bore. Each wheel weighs in at 5.27kg (11.6lbs) thanks to the low-pressure cast, flow formed monoblock construction. The double valve hole design is better suited to the enthusiast filling up with nitrogen allowing natural air to be released as nitrogen enters the tyre. They also feature a recess to the rear to allow fitment with hubcentric wheel spacers. They are available in a range of colours finished with durable paint and clear-coated finish. Please note that valves are not included, these can be purchased separately on our site.
Fitments available 15x8 & 15x9 with 17's coming soon for S2000, EP3, DC5 etc.
Prices start from £660 delivered for a set of 4.
Available in 5 colours : TUNGSTEN, CHARCOAL, NICKEL, SILVER, and BRONZE.
Find your wheel here... http://www.tegiwaimports.com/wheels/949-racing.html
Thanks
TEGIWA
