Search results

Got a jdm 98 dc2 for sale. Just reduced the price

Bump. 6500. Could do with freeing the space in the workshop now!

Bump

Found a skyline i want. Can deliver any where in the country for 7k

Selling my 99 integra as i purchased it over a year ago from a friend and have stored it since. Covering maybe 150 miles since purchase. Vehicle details 1999 JDM DC2 98 spec championship white 132k kilometres (not converted) 2 keys Cat 1 toad alarm + certificate Import docs, manuals + large...

Sorted. Thanks peeps

Im after a B18C Map sensor, i think a B16b etc eill all be the same. Can be pattern or oem, i dont need a higher voltage after market item. Let me know

Thanks again

Ive just had a thought. MAP sensor. When i took the plugs out they where black from running rich and they had only done 50 miles! Next thing to test

So i replaced the throttle body. Still no better! So far i have Replaced the throttle body Iacv Set the tps and tested it Checked the timing + ignition timing. So when i start the car. It runs and idles close to 2000. And once it warms up it settles at about 1500 with a slight hunt. If you...

Ill be selling my CW 98 spec JDM dc2 at the end of Feb mate

After a b18c standard throttle body. B16b would be ok. Ideally with map and Tps sensors. Dan

Ek civica where h4 bulbs, i assume as yours is non HID it should be the same

I hope so! Keep you updated! Thanks for all the help!

Well im one step closerm good shout for the fuse! There is one i need to check. I removed the replacement VSS. And split both of them. Two things i found. The drive link was missing in one, and the gear was smaller on the other!! Between the two i have now constructed one good sensor! Havnt...

Proped pain! I have dug out the service manual and the test for the VSS is as you said. Check for 5v feed. Ground. 5v pulsing from the signal wire. Then check wire from ECU to cluster for 5v. I have 2 VSS. I have an exploded diagram for the internals. Ill open them up tomorrow and make sure...

Exactly my plan mate. Thanks! I have a lift so ill raise it a foot. I did think all of the sensors where 5v. Im not sure where i got 12 from. I did wonder if it had a dodgey converter wired in some where/ removed. But i havnt come across it yet! Trying to get this 98 back to ita glory. Already...

Ive left the workshop now. Was getting frustrated and hungry Im assuming i should have a 12v feed A ground And a signal to the speedo?

Ill probly replace the throttle body. My next problem is the speedo not working. When i purchased the car it was ok. Reads in kmh still Ive swapped over another VSS. Ive also replaced the plug with a brand new multi plug and pigtail. And ive removed the multi plug to the speedo and cleaned...

Im not sure if its been stripped. Then replaced with the incorrect size. So it never closes fully!