Search results

Been here for a long time and finally i decided to make a built thread show you gus what i have done to my car all these years ! All started almost a decade ago when i bought my first and only honda so far a cypress green civic ek3 ils with the d15z6 vtec engine. back in the days it had an hks...

my set up is a I/H/E b18c5 engine with a chipped p28 ecu tuned by a local tuner. i wanted to check the advance timming so i grabbed my timming light pistol and i saw that the marks on the pulley can not align at all. i also used a second timming light with the same result. trying to find out...

I'm going to buy a fuel pump ,a used one and the guy says that is from an integra type r. How can i know if the fuel pump is from a b series doch vtec ie.b18cR ? it has any marks,numbers,different color or anything to differ from the non vtec pumps ? :nerv:

hi. I want to make the radiator fan to work also manualy from inside the car. I found that most how to's reccomends a relay and a fuse wiring. But why not make things easyer ? What if i splice the wires from the themp sensor to a toggle switch wont that work ?

hi guys !! i need new injectors since 2 of 4 oem ones are off ! (i checked them on injector cleaning/test machine) in the past a fault injector cost a motor to a friend. New ones from honda dealer are a rip off ! i heard that oem b18c-R injectors are 240cc what aftermarket injectors to buy...

http://www.youtube.com/watch?v=su4ipKQozT4 http://www.youtube.com/watch?v=TU4yVb7nQqE

Almost 2,5years on this set up. Tegiwa toda replica header 3''custom exhaust no cat two big straight trough resonators. https://www.youtube.com/watch?v=CUTvxB6GStA https://www.youtube.com/watch?v=bzBzbVjC1co

hi guys ! how much locking % has the oem itr/ctr lsd ? thinking upgrading to an mfactory lsd for street use i'll go for an 1way but haven't decided if i'll go for a helical or a metal plate one both these lsd's starts from 60% lock....

hey guys i have a question so long story short. installed a B&M fuel pressure gauge when i was using oem fuel pump i noticed that fuel pressure was dropping down to 0 after 3-4 hours car was sitting in the garage. since i was prepping the car for the tuner i installed a walbro 190lph fuel...

hi what heat range spark plug is better to use on a b18c dc2 engine with i/h/e bolt ons and ~11,8:1 cr ? when my car was stock i was using ngk bkr7eix -11 spark plugs. is it better to run one step colder since weather temperatures are almost 40c' and i'll use 95 octane fuel ...

old school integra type-R gear comparison and test !! - YouTube

hi i'm looking for an aluminum a/c engine mount from integra type R it looks like this : photo1_zpsd0545d84.jpg Photo by Certified_Honda | Photobucket and also if someone has one for sale i'll need the L trans brace that AEM v2 intake kits had like this one...

wondering if oem crank pulleys need replacement after some amount of time or km driven since most of them have a rubber inside ...

hi there ! since i have a chipped p28 ecu my check engine light lights up before red line. i want to hook up extra 2 led's to make it more noticeable.:) i need some help how to do the connection !

really i have mixed feelings on this type of mod. speed holes on rear bumper can help with extra drag rear bumper produce , i take this as a fact but for the looks what do you think ? this ?? or stay oem ?? thanks :nice:

Sportcar Motion KraftWerks ITR at Firebird Raceway - YouTube what is rotrex Why Rotrex? - YouTube and a friends car with rotrex ''intake'' rotrex type-R - YouTube

Mitsubishi Lancer Evo IX MR 870+Ps@11.000rpm (Boost 14psi) - YouTube revs a lot more than a honda ... i'm kinda jealous :)

the heater/blower is not working. well the 2,3 and 4 works but the 1 doesnt work. i have no idea whats wrong or what could possibly be the problem. any infor going about fixing it would be great help...

hi everyone ! i need a new fuel cap from honda so i need the part number its for a honda civic ek3.

i have a stock internal b18cR engine, i/h/e and tuned p28. i use rdx injectors ( i bought new with walbro 190 lph ) problem is : car starts fine every morning just like stock. but it will not start with first crank when weather is hotter like afternoon it need to crank it twice and or...