Search results


  1. Jclimb_EK9

    [FEATURED] EK9.Org Discord server

    Link updated :D
  2. Jclimb_EK9

    EK9 Winter Refresh 2020

    It's been a little while!! - With lockdowns and other poor weather it's been a pain to get out and actually do something productive!! I managed to strip any flaky underseal off the bottom of the car and treat any rust. Sadly there were spots like this all over the place - A lot of it had not...
  3. Jclimb_EK9

    Ek9 Rust

    Sadly that is how they go if people don't look after them / underseal them correct. Mine has had spots like that where people have done a shoddy job. (just behind the rear drivers seat mount) Just have to fix it and do it properly, which is what I am doing now. Rubberised underseal has a habit...
  4. Jclimb_EK9

    [FEATURED] EK9.Org Discord server

    Hello everyone! We have recently created a discord server for those who want to chat more frequently or get questions answered faster etc! URL: https://discord.gg/jAzbc7PK73
  5. Jclimb_EK9

    EK9 Winter Refresh 2020

    The switch will, you need to ground the switch so the light on the switch turns on and works. (not sure if MOT requirement) The bulb will only need two, yes.
  6. Jclimb_EK9

    EK9 Winter Refresh 2020

    Rear fog, typically people use one of the reverse light holders with a red bulb. MOT requirement is one reverse light and one fog take a single wire from the fusebox accessory ports with an inline use run a wire (as neatly as you like) back to one of the reverse bulbs, cut the live to that bulb...
  7. Jclimb_EK9

    EK9 Winter Refresh 2020

    Front foglight wiring? (Bit connecting to the lamps themselves) I've tucked the loom into the wings of the car and cable tied them up. The car never came with the lights themselves and had just the plugs floating in the engine bay. As for the interior wiring, It's two plugs from the fusebox and...
  8. Jclimb_EK9

    EK9 Winter Refresh 2020

    So, the EK9 is back from paint :D Spoon sports stripes have gone. They may make a return soon, once the rest of the work is done. The lighting in the garage does not help the colour. but out in the day it's perfect Champ white. The weather was a tad miserable so wanted to get it put away...
  9. Jclimb_EK9

    EK9 Winter Refresh 2020

    Arches will be cut and replaced with OE like parts. Inners will have to be made from replacement metal. it's only a small part so not a big deal.
  10. Jclimb_EK9

    EK9 Winter Refresh 2020

    Had the EK9 for about 2 years now. Done a fair amount of work on it, mods. etc. The previous owner had the arches "done" but clearly it was a filler over ground down rust. And it's come back. This time it's a lot worse! They also did the arches in a colour a shade yellower than the rest of the...
  11. Jclimb_EK9

    Server Hard Drive Failure

    Hey RVM!! Thanks for keeping the Server up and running. - If you need help with keeping it online / Updated. Let me know! Happy to help where possible. Would be good to get another Few Admins on the site too that are active, myself included.
  12. Jclimb_EK9

    Civic Jordan 258 rebuild

    Interested to see how you have mounted that in the back.. Keen todo that on mine!
  13. Jclimb_EK9

    Trying to restore a 1997 EK9 to its former self

    If it's Squeaking it could be bushes. - Though i would not expect wrong pads to squeak. If it's a rumble then if you go round a left hand bend, expect the right wheel bearing to rumble and vice-versa for the opposite :) FYI EBC make a good setup for the EK9 :) got a set on mine and fitted with...
  14. Jclimb_EK9

    Anyone interested in having another meet?

    I Might come down :) I understand there is a supercars and tacos thing there too! :)
  15. Jclimb_EK9

    Trying to restore a 1997 EK9 to its former self

    The grounds are extremely important, I found out the hard way by using a fresher/ new bolt on the gearbox ground and I had all sorts of issues.. the engine bay had been painted by previous owners so the ground was using the bolt thread as contact point not the lug on the cable.. sanded it back...
  16. Jclimb_EK9

    Trying to restore a 1997 EK9 to its former self

    I wanted to import one, but again I managed to find mine for a decent price here in the UK already.. It's not been without it's problems but It should good to go soon enough !
  17. Jclimb_EK9

    Trying to restore a 1997 EK9 to its former self

    I recognise this car from the for sale ad here ! - I was going to look at it before buying mine.. Glad to see someone got it and is going to give it the love it needs :)...
  18. Jclimb_EK9

    JDM Combe 2019 Stand

    booked :D
  19. Jclimb_EK9

    New here : after info on my EK9 if previous owners are on here

    The spoon stripe kit and the banner were done by the previous owner. it was pretty stock when he bought it off the chap before him. It's always had the cusco coils though, those were done in Japan as far as I can tell :)
  20. Jclimb_EK9

    New here : after info on my EK9 if previous owners are on here

    The only decent one I have got of the car :)
Back
Top