Search results


  1. E

    Need help to identify oil cooler connector size

    I bought a used oil cooler which come with hoses and connector. Now I am going to order a new oil sandwich plate, I am trying to find what size is my hose connector. Please see picture below which I measured with caliper of the hose connector inner diameter. Is it AN12? Thanks!
  2. E

    EK wagon - Orthia

    Sold my family car Honda Jazz GE6 and replaced it with this Honda Orthia. The front end converted to +99 EK, My brother used to have one that converted to +98 EK9 front end which i had posted before, but he sold it few years ago.
  3. E

    2015 update - on pg2

    I have been very busy in the last 2 years and so much has change. I got married and have a lovely daughter now. But my hobby has not change, I still keeping my EK4 but modding it become very unlikely. So it has not change much in 2 years time. My EK4 SiR, enjoy!! An my 4.5 months old...
  4. E

    Updated July19: Y56 EK hatch with Yellow Recaro Wildcat

    I have been a long time member but rarely post. I shall be getting just 1 DC2R yellow Recaro (finger cross), i know it is very rare and it is the first time i come across one in my 13 years ownership of my EK4. Currently i have complete EK9 interior with some Spoon items, Now the...
  5. E

    My new daily EG6

    Replaced my daily EG4 with this black EG6 Old EG4 New EG6 The EG6 is just imported from Japan...the condition isn't perfect but it is alot better than getting iy locally.
  6. E

    Y56 EK4 with 16" ITR wheels

    I bought this ITR copy wheels from Tegiwa, i just want the look of 16" ITR wheels in 4x100. Finally put it on my EK4. Also showing my newly painted carbon hood! The ITR copy wheels (16"x7 45 offset) won't clear the Spoon caliper (i have 3 mm spacer put in to clear the caliper)...
  7. E

    Update July 2012

    Haven't post for a while, got some new items, - Spoon sport muffler - Spoon mid pipe - Spoon hood (being paint at the moment) Finally the current outlook, I am quite surprise about this Spoon mid pipe + Spoon sport muffler set up. It is better than my previous set up Stock...
  8. E

    Just washed my Y56 EK4

    Took this late in the day.........enjoy!! Added engine bay and interior pictures,
  9. E

    Location of Starter Cut Relay?

    As said above i looked at the service manual from the USDM, there shall be a starter cut relay location under the driver side kick panel. I spent more than 1 hour looking for it but without luck, anyone? I have starting issue with my JDM EK4 and it would not start / turn after driving it...
  10. E

    EK hatch meeting with EK wagon!!

    Actually it is a Honda Orthia with EK9 front end conversion, Enjoy!
  11. E

    Update with new wheels

    I haven't post anything for quite sometime, here is some update to the car (JDM EK4), Real Racing R2 wheels, (very rare forged wheels), 15"x6.5 +45 offset Aragosta suspension, first time getting a good suspension!! F:5K R:6K (yes that is original setting from Aragosta). It is very...
  12. E

    Test drive FD2

    Test drive one today, the body structure is very rigid. The car steer very fast, it is alot quicker than EK9, and it turn really quick. The engine has very good low end power + good top end! It is very fast from 0-100km/hr, i had wheel spin through the whole first gear when i start from stand...
  13. E

    Apex's Power FC help

    I need to lean down the idling fuel with the power FC. Currently the air/fuel ratio is at 11.8 which is very rich. I have tried to use the hand-held controller to lean it down but without much luck. Can someone give me some direction. I tried to use the setting-> InjMap-> input smaller...
  14. E

    ORC 309 Clutch with flywheel

    Item for sale: ORC 309 clutch with flywheel Price: 450 pound Location: Hong Kong Condition: Good condition Description: Clutch panel is not too heavy. Buyer pay for shipping. Pictures:
  15. E

    B16A rebuild project

    Start my long awaited engine rebuild. I am doing the job with hand tools only and working alone. But when i need an extra hand i would call my friend to come and help. This is the first time i rebuild an engine so i will learn as i work through. I have a Honda service manual on hand and some...
  16. E

    Zhuhai International Circuit

    Today i had a chance to join my friends in the Zhuhai track day. I took the ferry early in the morning to China, where my friends having the track day. My friend let me took his NSX out to the track, i had a few laps. I was surprise how much traction it had. It was almost impossible to lose...
  17. E

    Out of 4 months storage

    Just out of 4 months storage, Start working on it again with some new mods, - S80 ITR tranny - ARC radiator - Mugen 4-1 header - Mugen Air box - Tegiwa 3 point strut bar Donor car, I bought this donor car off my friend who fitted alot of goodie on it, so i...
  18. E

    Muffler condition?

    I wonder how much performance different if the muffler is toasted. I bought a stock EK9 muffler which has some lose parts inside. I can heard the lose parts inside when i shake the muffler. Is muffler no good? Or it is just louder without affecting the performance? Thanks!
  19. E

    My EK4 refresh is completed!!

    Updated photos on page 2... I finally completed with my rebuilt after soooo many misfortune and i promise to have some nice photos to share with you guy. With my brother EF, Finally all 3 generation of Civic together (EC9; EG4; EK4)!!
  20. E

    Got back my EK4 from Police impound lot

    I got the car back after 72 hours, they used their max. allowed time to retain my car. They said i have to tow my car. They don't allow me driving it out even those my car is still driveable and have license and insurance. It is bullshit, anyway the tow drive drop off my car almost as soon as i...
Back
Top