Search results

thanks mate :) gettin there :) picking up some more parts at the end of the month, then all i need is to get some bit from rywire and do all the gaskets and it should be good to crank over :D

engine out and ready to strat rubbing it down and more primer before the paint goes on :) cleaned and painted :) yes some of the wiring got paint over it but this is only for now. once the engine in and running and the car has had the body work done and a repaint. its going back on the road...

quick update, sorry iv not been posting alot to you guys following the build, been looking for another job so its kinda taking priority the last week or 2. i have no pics as yet but i will be uploading some tomorrow night, got ma engine out and engine bay has had a quick paint for now. still...

well unfortunately icant use ma old obd0 loom as its been very badly cut and "repaired", injectors are cracked and theres also some very poor connections in places, my car was a d16a9 before aswell so i think if i was going to use and obd0 it would have to be a loom of a vtec model, trying to...

cant wait to get it finished..still a long way off though , but need to find out how to run the obd2a loom first, really want to stick with it to run the ek9 ecu and keep the vtec controller, not having alot of luck so far :(

picked up the b16a2 at the weekend, got a preface lift type r ecu and buddy club vtec controller with it :p couldny get it in the garage as a planned so took the intake off it and its sitting here just now until a can clear more room, need to get mounts and some loom conversion stuff then a full...

hey guys looking for a bit of help as a cant seem to find a straight answer on the net.. at the end of the month im picking up a b16a2 to swap into my ed9 crx..the engine is running with an ek9 ecu and obd2a loom.. will the full obd2 loom work with my crx and is there any conversion harnesses...

Update after all day in the garage, the dash is out :) once iv painted the cage and floor the new dash will be goin in and il be cutting it around the cage to keep it tidy and as you can see from the pics the cage has now got its first coat.. Also decided to get my speedhunters sticker on the...

thanks lads, hopefully get more of the cage done this weekend, currently trying to get the dash out so a can paint the cage down the a pillars too :) also messaged a guy about a b16a2 engine, unfortunately its provisionally sold...although he has said if the engine is not paid for by sunday...

quick update: started painting the cage and inside, the dash is still to be removed but it will be coming out soon as possible so a can continue and finish painting the inside. Moulding the spoiler has been put on hold as a need to get hold of non drying plasticine clay as its easier to use...

the damage to the worst of the the 2 te37s, its not the worst iv seen...

not been much going on recently due to work, but i managed to pick up 2 16" 7j te37s from a fellow ek9.ork user one is in need of a weld and a flat spot removed, the other has 4 very small flat spots that i only noticed because its what i do at work...there so small i could leave them but i want...

good work mate :)

so iv been on here for a few months, and only just gettin round to sayin hi :L , located in central scotland iv got a 1990 mk2 crx zc in flint black, gutted out, caged and sittin in the garage :L currently with half and engine and no front end as im planning to put a b16a2 or b18c4 in it, check...

just noticed ur thread link on your comments on mine :L nice build mate, keep up the good work :)

Thanks mate, im really hopin it works out good aswell... if it works really well then later on in time i migt make a mould and get a carbon one made :) Not the hardest thing to learn tbh but it can be tricky lol

Gettin there bud, itl sure keep u busy got a crx in the garage to work on to :)

spent most of the day in the garage, couldnt get a hold of an engine crane off ma mate to get the block and gear box out, so i i thought id make a start to the body work issues, started repairing a wing i had dented being an idiot, and also thought id make start to mocking up this duckbill wing...

things are starting to pick up more, got more free time to work on the car so i can get more done :) picked up ANOTHER set of front lights a i bought a set, received sir lights that were smashed and the guy wouldnt refund me.. however, a random guy on crx-uk messaged me on fb askin if i need...

thats wat im aiming for :) will be alot of body work stuff goin on when the engine stuff has been sorted, currently stripping the engine but iv found that who ever was last near the engine hasnt done a good job, bolts were barely tight on the head internals, the loom has been cut and re...